XP ISO/TS 12025

XP ISO/TS 12025

June 2013
Standard Cancelled

Nanomaterials - Quantification of nano-object release from powders by generation of aerosols

ISO/TS 12025:2012 provides methodology for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a defined aerosolization procedure. In addition to information in terms of mass, the aerosol is characterized for particle concentrations and size distributions. ISO/TS 12025:2012 provides information on factors to be considered when selecting from the available methods for powder sampling and treatment procedures and specifies minimum requirements for test sample preparation, test protocol development, measuring particle release and reporting data. In order to characterize the full size range of particles generated, the measurement of nano-objects as well as agglomerates and aggregates is recommended in ISO/TS 12025:2012.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2013

Number of pages

42 p.

Reference

XP ISO/TS 12025

ICS Codes

07.120   Nanotechnologies

Classification index

T16-202

Print number

1 - 13/06/2013

International kinship

ISO/TS 12025:2012
Sumary
Nanomaterials - Quantification of nano-object release from powders by generation of aerosols

ISO/TS 12025:2012 provides methodology for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a defined aerosolization procedure. In addition to information in terms of mass, the aerosol is characterized for particle concentrations and size distributions.

ISO/TS 12025:2012 provides information on factors to be considered when selecting from the available methods for powder sampling and treatment procedures and specifies minimum requirements for test sample preparation, test protocol development, measuring particle release and reporting data. In order to characterize the full size range of particles generated, the measurement of nano-objects as well as agglomerates and aggregates is recommended in ISO/TS 12025:2012.

Standard replaced by (1)
XP CEN ISO/TS 12025
June 2015
Standard Cancelled
Nanomaterials - Quantification of nano-object release from powders by generation of aerosols

ISO/TS 12025:2012 provides methodology for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a defined aerosolization procedure. In addition to information in terms of mass, the aerosol is characterized for particle concentrations and size distributions. ISO/TS 12025:2012 provides information on factors to be considered when selecting from the available methods for powder sampling and treatment procedures and specifies minimum requirements for test sample preparation, test protocol development, measuring particle release and reporting data. In order to characterize the full size range of particles generated, the measurement of nano-objects as well as agglomerates and aggregates is recommended in ISO/TS 12025:2012.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et abréviations
    1
  • 3.1 Termes généraux
    1
  • 3.2 Termes associés aux propriétés et au mesurage des particules
    2
  • 4 Symboles
    5
  • 5 Facteurs influençant les résultats d'une libération de nano-objets par des poudres
    5
  • 5.1 Sélection de la méthode d'essai
    5
  • 5.2 Propriétés du matériau influençant la libération de nano-objets d'une poudre
    5
  • 5.3 Étapes de l'essai
    6
  • 6 Exigences de l'essai
    7
  • 6.1 Généralités
    7
  • 6.2 Évaluation de la sécurité
    7
  • 6.3 Préparation des échantillons
    8
  • 6.4 Traitement des échantillons
    8
  • 6.5 Mesurage des nano-objets aérosolisés
    10
  • 7 Exigences pour les configurations et protocoles d'essai
    15
  • 8 Consignation des données
    16
  • Annexe A (informative) Considérations pour la sélection du mode opératoire de traitement
    17
  • Annexe B (informative) Méthodes du tambour rotatif et de la chute continue
    19
  • Annexe C (informative) Méthode de l'agitateur vortex
    23
  • Annexe D (informative) Méthode dynamique
    25
  • Annexe E (informative) Principes de la désagglomération
    28
  • Annexe F (informative) Sélection de la méthode de mesure des nano-objets
    29
  • Bibliographie
    32
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ