FD ISO/TR 10064-6
Code of inspection practice - Part 6 : bevel gear measurement methods
ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485. Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006. ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.
ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485.
Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006.
ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références1
-
3 Symboles, termes et définitions2
-
3.1 Termes et définitions2
-
3.2 Symboles3
-
4 Mesurage des engrenages coniques4
-
4.1 Considérations générales relatives à la fabrication et à l'achat4
-
4.2 Documentation de fabrication5
-
4.3 Contrôle du mode opératoire5
-
4.4 Méthodes de mesure5
-
4.5 Considérations supplémentaires6
-
4.6 Critères d'acceptation7
-
5 Méthodes et pratiques de mesure7
-
5.1 Lignes directrices pour le mesurage des caractéristiques de l'engrenage7
-
5.2 Pratiques de mesurage8
-
5.3 Mesurage des écarts de pas10
-
5.4 Mesurage du faux-rond des engrenages coniques17
-
5.5 Mesurage de la forme de flanc19
-
5.6 Contrôle de la marque de portée de dents25
-
5.7 Inspection composée d'engrènement sur un flanc32
-
5.8 Essai composé d'engrènement sur deux flancs33
-
5.9 Mesurage de l'épaisseur de la dent36
-
5.10 Applications en fabrication39
-
6 Tolérances de surfaces de référence recommandées39
- Bibliographie40
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ