NF EN 10221

NF EN 10221

February 1996
Standard Cancelled

Surface quality classes for hot-rolled bars and rods. Technical delivery conditions.

Le présent document spécifie les conditions en matière de qualité de surface des ronds et fils machine larninés à chaud de diamètre nominal compris entre 5mm < ou = dN < ou = 150 mm. Il s'applique aux aciers de construction mécanique mais peut également, après accord, être appliqué aux aciers de construction d'usage général et aux aciers à outiIs.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 1996

Number of pages

11 p.

Reference

NF EN 10221

ICS Codes

77.140.60   Steel bars and rods
77.140.65   Steel wire, wire ropes and link chains

Classification index

A40-502

Print number

1 - 13/05/2011

European kinship

EN 10221:1995
Sumary
Surface quality classes for hot-rolled bars and rods. Technical delivery conditions.

Le présent document spécifie les conditions en matière de qualité de surface des ronds et fils machine larninés à chaud de diamètre nominal compris entre 5mm < ou = dN < ou = 150 mm. Il s'applique aux aciers de construction mécanique mais peut également, après accord, être appliqué aux aciers de construction d'usage général et aux aciers à outiIs.
Standard replaced by (1)
NF EN ISO 9443
July 2018
Standard Current
Surface quality classes for hot-rolled bars and wire rod

<p>This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions <i>d</i><sub>N</sub> from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.</p> <p>By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.</p> <p>This document is particularly applicable to steels for engineering and structural applications.</p> <p>This document does not include any requirements for the permissible depth of surface decarburization.</p> <p>NOTE The determination of depth of surface decarburization is presented in ISO 3887.</p> <p>The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.</p>

Table of contents
View the extract
  • Avant-propos
    3
  • 1
    Domaine d'application 4
  • 2
    Références normatives 4
  • 3
    Définitions 4
  • 4
    Prescriptions 5
  • 4.1
    Généralités 5
  • 4.2
    Commande 5
  • 4.3
    Désignation 6
  • 5
    Contrôle 6
  • 5.1
    Généralités 6
  • 5.2
    Méthodes d'essai 6
  • 6
    Réparations 8
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ