NF EN 61241-2-2
Electrical appartus for use in the presence of combustible dust - Part 2 : test methods - Section 2 : method for determining the electrical resistivity of dust in layers
Le présent document spécifie la méthode d'essai pour la détermination de la résistivité électrique d'une couche de poussière lorsqu'on y applique une tension continue ; il est applicable à la conception, à la construction, aux essais et à l'utilisation du matériel électrique destiné à être utilisé en présence de poussière combustible.
Le présent document spécifie la méthode d'essai pour la détermination de la résistivité électrique d'une couche de poussière lorsqu'on y applique une tension continue ; il est applicable à la conception, à la construction, aux essais et à l'utilisation du matériel électrique destiné à être utilisé en présence de poussière combustible.
ISO/IEC 80079-20-2:2016 is published as a dual logo standard and describes the test methods for the identification of combustible dust and combustible dust layers in order to permit classification of areas where such materials exist for the purpose of the proper selection and installation of electrical and mechanical equipment for use in the presence of combustible dust. The standard atmospheric conditions for determination of characteristics of combustible dusts are: - temperature -20 °C to 60 °C, - pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar) and - air with normal oxygen content, typically 21 % v/v. The test methods defined do not apply to: - recognized explosives, propellants (e.g. gunpowder, dynamite), or substances or mixtures of substances which may, under some circumstances, behave in a similar manner or - dusts of explosives and propellants that do not require atmospheric oxygen for combustion, or to pyrophoric substances. This first edition cancels and replaces the first edition of IEC 61241-2-1 published in 1994, the first edition of IEC 61241-2-2 published in 1993 and the first edition of IEC 61241-2-3 published in 1994, combining the requirements into a single document, and is considered to constitute a technical revision. Significant changes with respect to IEC 61241-2-1:1994, IEC 61241-2-2:1993 and IEC 61241-2-3:1994 can be found in the foreword of the document. Keywords: combustible dust
-
1 Domaine d'application4
-
2 Références normatives4
-
3 Définitions4
-
3.1 Poussière4
-
3.2 Poussière conductrice4
-
3.3 Poussière non conductrice4
-
3.4 Résistivité électrique4
-
4 Appareil d'essai5
-
5 Échantillon d'essai5
-
6 Mode opératoire5
-
6.1 Mesure préliminaire5
-
6.2 Mesure de la résistance6
-
6.3 Calcul de la résistivité6
-
7 Rapport d'essai6
- Figures7
- Annexe ZA (Normative) Références normatives à d'autres publications internationales avec les publications européennes correspondantes8
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ