NF EN ISO 10077-2
- Consult online for free
- Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames
ISO 10077-2:2017 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels. The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds). ISO 10077-2:2017 also gives criteria for the validation of numerical methods used for the calculation. ISO 10077-2:2017 does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pinpoint metallic connections. Thermal bridge effects between the frame and the building structure are not included. NOTE Table 1 in the Introduction shows the relative position of ISO 10077-2:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
ISO 10077-2:2017 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).
ISO 10077-2:2017 also gives criteria for the validation of numerical methods used for the calculation.
ISO 10077-2:2017 does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pinpoint metallic connections. Thermal bridge effects between the frame and the building structure are not included.
NOTE Table 1 in the Introduction shows the relative position of ISO 10077-2:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
<p>ISO 10077-2:2011 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.</p> <p>The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).</p> <p>ISO 10077-2:2011 also gives criteria for the validation of numerical methods used for the calculation.</p> <p>ISO 10077-2:2011 does not include effects of solar radiation, heat transfer caused by air leakage or three‑dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.</p>
- Avant-propos
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Symboles et indices
-
5 Méthode de calcul
-
6 Calcul du coefficient de transmission thermique
-
7 Rapport
- Annexe A (normative) Données d'entrée et fiche technique pour la sélection de la méthode - Modèle
- Annexe C (normative) Références régionales en ligne avec la politique de pertinence globale de l'ISO
- Annexe D (normative) Conductivité thermique et autres caractéristiques de matériaux courants
- Annexe E (normative) Résistances superficielles
- Annexe F (normative) Détermination du coefficient de transmission thermique
- Annexe G (normative) Exemples généraux pour la vérification des programmes de calcul à l'aide de la méthode de radiosité pour le traitement des cavités
- Annexe H (normative) Exemples d'encadrements de fenêtres pour la vérification des programmes de calcul à l'aide de la méthode de radiosité pour le traitement des cavités
- Annexe I (normative) Exemples d'encadrements de fenêtres pour la vérification des programmes de calcul à l'aide de la méthode de conductivité thermique unique pour le traitement des cavités
- Annexe J (normative) Essences de bois énumérées dans l'Annexe D
- Annexe B (informative) Données d'entrée et fiche technique pour la sélection de la méthode - Choix par défaut
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ