NF EN ISO 10524-1
Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices
ISO 10524-1:2018 specifies the design, construction, type testing, and marking requirements for pressure regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving surgical tools. Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures. ISO 10524-1:2018 applies to pressure regulators: a) intended to be connected to cylinders by the operator; b) with integral flow-metering devices intended to be connected to cylinders by the operator; c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators). A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable or pre-set. pressure regulators are intended to be fitted to refillable cylinders with a working pressure up to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the medical gas delivered.
ISO 10524-1:2018 specifies the design, construction, type testing, and marking requirements for pressure regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
ISO 10524-1:2018 applies to pressure regulators:
a) intended to be connected to cylinders by the operator;
b) with integral flow-metering devices intended to be connected to cylinders by the operator;
c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators).
A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable or pre-set.
pressure regulators are intended to be fitted to refillable cylinders with a working pressure up to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the medical gas delivered.
<p>ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:</p> <ul><li>oxygen;</li><li>nitrous oxide;</li><li>air for breathing;</li><li>helium;</li><li>carbon dioxide;</li><li>xenon;</li><li>mixtures of the gases listed above;</li><li>air for driving surgical tools;</li><li>nitrogen for driving surgical tools.</li></ul> <p>These pressure regulators are intended to be fitted to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and can be provided with devices which control and measure the flow of the medical gas delivered.</p> <p>The types of pressure regulators covered by ISO 10524-1:2006 are as follows:</p> <ul><li>pressure regulators intended to be connected to cylinders by the operator;</li><li>pressure regulators with integral flow-metering devices intended to be connected to cylinders by the operator;</li><li>pressure regulators that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators).</li></ul>
- Avant-propos
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Nomenclature
-
5 Exigences générales
-
6 Exigences relatives à la conception
-
7 Exigences relatives à la construction
-
8 Méthodes d'essai pour les essais de type
-
9 Marquage, code couleur et emballage
-
10 Informations devant être fournies par le fabricant
- Annexe A (informative) Justificatif
- Annexe B (informative) Écarts régionaux et nationaux en matière de code couleur et de nomenclature des gaz médicaux
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ