NF EN ISO 11148-3

NF EN ISO 11148-3

March 2013
Standard Current

Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers

ISO 11148-3:2012 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-3:2012 is applicable to drills, heavy duty drills with two handles and tappers. ISO 11148-3:2012 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. ISO 11148-3:2012 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2013

Number of pages

40 p.

Reference

NF EN ISO 11148-3

ICS Codes

25.080.40   Drilling machines
25.140.10   Pneumatic tools
25.140.99   Other hand-held tools

Classification index

E65-100-3

Print number

1 - 11/03/2013

International kinship

ISO 11148-3:2012

European kinship

EN ISO 11148-3:2012
Sumary
Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers

ISO 11148-3:2012 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

ISO 11148-3:2012 is applicable to drills, heavy duty drills with two handles and tappers.

ISO 11148-3:2012 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures.

ISO 11148-3:2012 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.

Replaced standards (1)
NF EN ISO 11148-3
December 2010
Standard Cancelled
Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers

<p>ISO 11148-3:2010 applies to hand-held non-electric power tools (hereafter referred to as “drills and tappers”) intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete, plastics, etc., or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.</p> <p>ISO 11148-3:2010 is applicable to drills, heavy duty drills with two handles and tappers. Examples of drills and tappers covered by ISO 11148-3:2010 are shown.</p> <p>ISO 11148-3:2010 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures.</p> <p>ISO 11148-3:2010 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 3.1 Définitions générales
    2
  • 3.2 Définitions relatives aux perceuses et aux taraudeuses
    4
  • 4 Exigences de sécurité et/ou mesures de prévention
    4
  • 4.1 Généralités
    4
  • 4.2 Sécurité mécanique
    5
  • 4.3 Sécurité thermique
    5
  • 4.4 Réduction du bruit
    6
  • 4.5 Vibrations
    6
  • 4.6 Matériaux et produits traités, utilisés ou dégagés
    7
  • 4.7 Ergonomie
    7
  • 4.8 Commandes
    8
  • 5 Vérification
    8
  • 5.1 Conditions générales des essais
    8
  • 5.2 Bruit
    9
  • 5.3 Vibrations
    9
  • 5.4 Démarrage intempestif
    9
  • 5.5 Fabrication de la machine portative
    9
  • 5.6 Structure de vérification des exigences de sécurité
    9
  • 6 Informations pour l'utilisation
    10
  • 6.1 Marquage, signes et avertissements écrits
    10
  • 6.2 Notice d'instructions
    11
  • 6.3 Instructions de fonctionnement
    16
  • 6.4 Données
    16
  • 6.5 Instructions pour la maintenance
    17
  • Annexe A (informative) Liste des phénomènes dangereux significatifs
    18
  • Annexe B (informative) Exemples de perceuses et de taraudeuses couvertes par la présente partie de l'ISO 11148
    20
  • Annexe C (normative) Symboles pour étiquettes et signes
    22
  • Annexe D (normative) Exigences de sécurité supplémentaires relatives aux machines à moteur à combustion interne
    23
  • Bibliographie
    27
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ