NF EN ISO 11148-6

NF EN ISO 11148-6

March 2013
Standard Current

Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners

ISO 11148-6:2012 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-6:2012 covers air-hydraulic impulse wrenches, impact wrenches, fastener installation tools, nutrunners, open-ended spanners (crow-foot with open-ended socket or tube nut wrench), ratchet wrenches and screwdrivers. ISO 11148-6:2012 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. ISO 11148-6:2012 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2013

Number of pages

44 p.

Reference

NF EN ISO 11148-6

ICS Codes

25.080.99   Other machine tools
25.140.10   Pneumatic tools
25.140.99   Other hand-held tools

Classification index

E65-100-6

Print number

1 - 19/02/2013

International kinship

ISO 11148-6:2012

European kinship

EN ISO 11148-6:2012
Sumary
Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners

ISO 11148-6:2012 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

ISO 11148-6:2012 covers air-hydraulic impulse wrenches, impact wrenches, fastener installation tools, nutrunners, open-ended spanners (crow-foot with open-ended socket or tube nut wrench), ratchet wrenches and screwdrivers.

ISO 11148-6:2012 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.

ISO 11148-6:2012 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Replaced standards (1)
NF EN ISO 11148-6
December 2010
Standard Cancelled
Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners

<p>ISO 11148-6:2010 applies to hand-held non-electric power tools (hereafter referred to as “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.</p> <p>ISO 11148-6:2010 covers air-hydraulic impulse wrenches, impact wrenches, fastener installation tools, nutrunners, open-ended spanners (crow-foot with open-ended socket or tube nut wrench), ratchet wrenches and screwdrivers.</p> <p>ISO 11148-6:2010 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.</p> <p>ISO 11148-6:2010 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 3.1 Définitions générales
    2
  • 3.2 Définitions relatives aux machines portatives d'assemblage pour éléments de fixation filetés
    4
  • 4 Exigences de sécurité et/ou mesures de prévention
    5
  • 4.1 Généralités
    5
  • 4.2 Sécurité mécanique
    5
  • 4.3 Sécurité thermique
    6
  • 4.4 Réduction du bruit
    6
  • 4.5 Vibrations
    7
  • 4.6 Matériaux et produits traités, utilisés ou dégagés
    7
  • 4.7 Ergonomie
    8
  • 4.8 Commandes
    9
  • 5 Vérification
    11
  • 5.1 Conditions générales des essais
    11
  • 5.2 Bruit
    11
  • 5.3 Vibrations
    11
  • 5.4 Démarrage intempestif
    11
  • 5.5 Fabrication de la machine portative
    11
  • 5.6 Structure de vérification des exigences de sécurité
    11
  • 6 Informations pour l'utilisation
    12
  • 6.1 Marquage, signes et avertissements écrits
    12
  • 6.2 Notice d'instructions
    13
  • 6.3 Instructions de fonctionnement
    18
  • 6.4 Données
    19
  • 6.5 Instructions de maintenance
    19
  • Annexe A (informative) Liste des phénomènes dangereux significatifs
    21
  • Annexe B (informative) Exemples de machines portatives d'assemblage pour éléments de fixation filetés couvertes par la présente partie de l'ISO 11148
    23
  • Annexe C (normative) Symboles pour étiquettes et signes
    25
  • Annexe D (normative) Exigences de sécurité supplémentaires relatives aux machines à moteur à combustion interne
    27
  • Bibliographie
    31
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ