NF EN ISO 11296-2

NF EN ISO 11296-2

February 2018
Standard Current

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : Lining with continuous pipes

ISO 11296-2:2018, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground non-pressure drainage and sewerage networks. It is applicable to polyethylene (PE) pipes of three different types: - PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes; - PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating; - PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe ("coated pipe"), see Annex A. In addition, ISO 11296-2:2018 covers: - jointing of pipe lengths by means of butt fusion; - fabricated and injection-moulded fittings made of PE.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2018

Number of pages

18 p.

Reference

NF EN ISO 11296-2

ICS Codes

23.040.05   Pipelines and its parts for external sewage systems
23.040.20   Plastics pipes

Classification index

P16-364-2

Print number

1

International kinship

ISO 1296-2:2018

European kinship

EN ISO 11296-2:2018
Sumary
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : Lining with continuous pipes

ISO 11296-2:2018, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground non-pressure drainage and sewerage networks. It is applicable to polyethylene (PE) pipes of three different types:

- PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;

- PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating;

- PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe ("coated pipe"), see Annex A.

In addition, ISO 11296-2:2018 covers:

- jointing of pipe lengths by means of butt fusion;

- fabricated and injection-moulded fittings made of PE.

Replaced standards (1)
NF EN 13566-2
February 2006
Standard Cancelled
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : lining with continuous pipes

Le présent document, à consulter en association avec la Partie 1, spécifie les exigences et les méthodes d'essai relatives aux tubes et raccords qui font partie des réseaux de canalisations plastiques mis en oeuvre sous forme de tubes continus avec espace annulaire pour la rénovation des réseaux d'assainissement sans pression. Il traite des tubes à paroi compacte (HW) en PE ou en PP, des tubes à paroi structurée (SW) à double paroi annelée dont la(es) couche(s) structurelle(s) est(sont) en PE ou en PP, de l'assemblage de longueurs de tube par soudage bout à bout (HW) ou par électrosoudage et des raccords façonnés et moulés par injection en PE, PP et PVC-U.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles et abréviations
  • 5 Tuyaux au stade "M"
  • 6 Raccords au stade "M"
  • 7 Accessoires
  • 8 Aptitude à l'emploi du système pour les tuyaux et raccords au stade "I"
  • 9 Pratique d'installation
  • Annexe A (normative) Tuyaux en couches
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ