NF EN ISO 12005

NF EN ISO 12005

February 2004
Standard Cancelled

Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

ISO 12005:2003 specifies a method for determining the polarization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be applied to repetitively pulsed lasers, if their electric field vector orientation does not change from pulse to pulse. ISO 12005:2003 also specifies the method for determining the direction of the plane of oscillation in the case of linearly polarized (totally or partially) laser beams. It is assumed that the laser radiation is quasi-monochromatic and sufficiently stable for the purpose of the measurement. The knowledge of the polarization status can be very important for some applications of lasers with a high divergence angle, for instance when the beam of such a laser shall be coupled with polarization dependent devices (e.g. polarization maintaining fibres). ISO 12005:2003 also specifies a method for the determination of the state of polarization of highly divergent laser beams, as well as for the measurement of beams with large apertures.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2004

Number of pages

21 p.

Reference

NF EN ISO 12005

ICS Codes

31.260   Optoelectronics. Laser equipment

Classification index

S10-123

Print number

1 - 28/10/2004

International kinship

European kinship

EN ISO 12005:2003
Sumary
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

ISO 12005:2003 specifies a method for determining the polarization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be applied to repetitively pulsed lasers, if their electric field vector orientation does not change from pulse to pulse.

ISO 12005:2003 also specifies the method for determining the direction of the plane of oscillation in the case of linearly polarized (totally or partially) laser beams. It is assumed that the laser radiation is quasi-monochromatic and sufficiently stable for the purpose of the measurement.

The knowledge of the polarization status can be very important for some applications of lasers with a high divergence angle, for instance when the beam of such a laser shall be coupled with polarization dependent devices (e.g. polarization maintaining fibres). ISO 12005:2003 also specifies a method for the determination of the state of polarization of highly divergent laser beams, as well as for the measurement of beams with large apertures.

Replaced standards (1)
NF EN ISO 12005
November 1999
Standard Cancelled
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

Dans la série de normes relatives aux paramètres du faisceau laser, le présent document propose les méthodes destinées à déterminer l'état et le degré de polarisation des lasers continus.

Table of contents
View the extract
  • 1
    Domaine d'application 1
  • 2
    Références normatives 1
  • 3
    Termes et définitions 1
  • 4
    Méthode d'essai de l'état de polarisation 3
  • 4.1
    Principe de mesurage 3
  • 4.2
    Montage d'essai 3
  • 4.3 Instruments
    4
  • 4.4
    Mode opératoire d'essai 5
  • 4.5
    Analyse des résultats 6
  • 5
    Rapport d'essai 7
  • Annexe A (informative) Description complète de l'état de polarisation d'un faisceau laser monochromatique
    9
  • Bibliographie
    11
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ