NF EN ISO 12100

NF EN ISO 12100

December 2010
Standard Current

Safety of machinery - General principles for design - Risk assessment and risk reduction

ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or sufficient risk reduction. Guidance is given on the documentation and verification of the risk assessment and risk reduction process. ISO 12100:2010 is also intended to be used as a basis for the preparation of type-B or type-C safety standards. It does not deal with risk and/or damage to domestic animals, property or the environment.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

QSE, Sécurité, Gestion des risques et SST

Publication date

December 2010

Number of pages

92 p.

Reference

NF EN ISO 12100

ICS Codes

13.110   Safety of machinery

Classification index

E09-001

Print number

1 - 28/12/2010

International kinship

ISO 12100:2010

European kinship

EN ISO 12100:2010
Sumary
Safety of machinery - General principles for design - Risk assessment and risk reduction

ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or sufficient risk reduction. Guidance is given on the documentation and verification of the risk assessment and risk reduction process.

ISO 12100:2010 is also intended to be used as a basis for the preparation of type-B or type-C safety standards.

It does not deal with risk and/or damage to domestic animals, property or the environment.

Replaced standards (5)
NF EN ISO 12100-1
January 2004
Standard Cancelled
Safety of machinery - Basic concepts, general principles for design - Part 1 : basic terminology, methodology

<p>ISO 12100-1:2003 defines basic terminology and methodology used in achieving safety of machinery.</p> <p>The provisions stated are intended for the designer.</p> <p>The standard does not deal with damage to domestic animals, property or the environment.</p>

NF EN ISO 12100-1/A1
August 2009
Standard Cancelled
Safety of machinery - Basic concepts, general principles for design - Part 1 : basic terminology, methodology

Le présent document comprend : la modification de la définition du protecteur réglable ; le remplacement de la référence à l'ISO 14121:1999 par celle à l'ISO 14121-1:2007 ; la modification rédactionnelle de l'Annexe ZA relative à la Directive "Machines" 98/37/CE ; l'ajout de l'Annexe ZB pour venir à l'appui de la Directive "Machines" 2006/42/CE.

NF EN ISO 12100-2
January 2004
Standard Cancelled
Safety of machinery - Basic concepts, general principles for design - Part 2 : technical principles

<p>ISO 12100-2:2003 defines technical principles to help designers in achieving safety in the design of machinery.</p> <p>It does not deal with damage to domestic animals, property or the environment.</p>

NF EN ISO 12100-2/A1
August 2009
Standard Cancelled
Safety of machinery - Basic concepts, general principles for design - Part 2 : technical principles

Le présent document comprend les principaux points suivants : mise à jour de références normatives ; mise en conformité de certaines prescriptions techniques avec la Directive "Machines" 2006/42/CE ; modification rédactionnelle de l'Annexe ZB relative à la Directive "Machines" 98/37/CE ; ajout de l'Annexe ZC pour venir à l'appui de la Directive "Machines" 2006/42/CE.

NF EN ISO 14121-1
November 2007
Standard Cancelled
Safety of machinery - Risk assessment - Part 1 : principles

<p>ISO 14121-1:2007 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine.</p> <p>ISO 14121-1:2007 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out.</p> <p>It is not applicable to risks posed to domestic animals, property or the environment.</p>

See more
Table of contents
View the extract
  • Avant-propos
    v
  • Introduction
    VI
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Stratégie d'appréciation du risque et de réduction du risque
    9
  • 5 Appréciation du risque
    13
  • 5.1 Généralités
    13
  • 5.2 Information pour l'appréciation du risque
    13
  • 5.3 Détermination des limites de la machine
    14
  • 5.4 Identification des phénomènes dangereux
    16
  • 5.5 Estimation du risque
    18
  • 5.6 Évaluation du risque
    23
  • 6 Réduction du risque
    24
  • 6.1 Généralités
    24
  • 6.2 Mesures de prévention intrinsèque
    25
  • 6.3 Protection et mesures de prévention complémentaires
    38
  • 6.4 Informations pour l'utilisation
    50
  • 7 Documentation relative à l'appréciation du risque et à la réduction du risque
    55
  • Annexe A (informative) Représentation schématique d'une machine
    56
  • Annexe B (informative) Exemples de phénomènes dangereux, de situations dangereuses et d'événements dangereux
    57
  • Annexe C (informative) Index trilingue des termes et expressions spécifiques utilisés dans l'ISO 12100
    67
  • Bibliographie
    80
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ