ISO 12217-1:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using ISO 12217-1:2013 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. ISO 12217-1:2013 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, ISO 12217-1:2013 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. ISO 12217-1:2013 excludes: inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; personal watercraft covered by ISO 13590 and other similar powered craft; gondolas and pedalos; sailing surfboards; surfboards, including powered surfboards; hydrofoils and hovercraft when not operating in the displacement mode (displacement mode means that the boat is only supported by hydrostatic forces); and submersibles. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.
ISO 12217-1:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.
The evaluation of stability and buoyancy properties using ISO 12217-1:2013 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.
ISO 12217-1:2013 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.
In relation to habitable multihulls, ISO 12217-1:2013 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation.
ISO 12217-1:2013 excludes:
It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.
<p>This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.</p> <p>The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.</p> <p>This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to and including 24 m hull length. However, it may also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.</p> <p>This part of ISO 12217 excludes</p> <ul><li>inflatable and rigid-inflatable boats up to 8 m covered by ISO 6185,</li><li>canoes, kayaks or other boats with a beam of less than 1,1 m,</li><li>hydrofoils and hovercraft when operating in the dynamically supported mode, and </li><li>submersibles.</li></ul> <p>It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which should be separately considered if appropriate.</p>
Le présent amendement modifie le Tableau 2, certaines parties de l'article 6 et remplace les Annexes B (normative) "Méthode pour l'essai de chargement désaxé", C (normative) "Méthode de mesure de la marge de franc-bord" et H (annexe informative) "Résumé des exigences" de la norme NF EN ISO 12217-1:2002.
<p>ISO 12217-1:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.</p> <p>The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.</p> <p>ISO 12217-1:2015 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217‑3 and they are decked and have quick-draining recesses which comply with ISO 11812.</p> <p>In relation to habitable multihulls, ISO 12217-1:2015 includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.</p> <p>ISO 12217-1:2015 excludes:</p> <p> inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217;</p> <p> personal watercraft covered by ISO 13590 and other similar powered craft;</p> <p> gondolas and pedalos;</p> <p> sailing surfboards;</p> <p> surfboards, including powered surfboards;</p> <p> hydrofoils and hovercraft when not operating in the displacement mode; and</p> <p> submersibles.</p> <p>ISO 12217-1:2015 does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ