NF EN ISO 12571

NF EN ISO 12571

October 2013
Standard Cancelled

Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties

ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method. ISO 12571:2013 does not specify the method for sampling. The methods specified in ISO 12571:2013 can be used to determine the moisture content of a sample in equilibrium with air at a specific temperature and humidity.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2013

Number of pages

26 p.

Reference

NF EN ISO 12571

ICS Codes

91.100.01   Construction materials in general

Classification index

P50-758

Print number

1 - 25/10/2013

International kinship

ISO 12571:2013

European kinship

EN ISO 12571:2013
Sumary
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties

ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products:

a) using desiccators and weighing cups (desiccator method);

b) using a climatic chamber (climatic chamber method).

The desiccator method is the reference method.

ISO 12571:2013 does not specify the method for sampling.

The methods specified in ISO 12571:2013 can be used to determine the moisture content of a sample in equilibrium with air at a specific temperature and humidity.

Replaced standards (1)
NF EN ISO 12571
October 2000
Standard Cancelled
Hygrothermal performance of building materials - Determination of hygroscopic sorption properties

Le présent document spécifie deux méthodes alternatives de détermination des propriétés de sorption hygroscopique des matériaux et produits poreux utilisés dans le bâtiment. Ces deux méthodes peuvent être utilisées pour déterminer la teneur en humidité d'un échantillon en équilibre avec un air à température et humidité données. Le présent document ne spécifie pas de méthode d'étalonnage.

Standard replaced by (1)
NF EN ISO 12571
November 2021
Standard Current
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties

<p>This document specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products:</p> <p>a) using desiccators and weighing cups (desiccator method);</p> <p>b) using a climatic chamber (climatic chamber method).</p> <p>The desiccator method is the reference method.</p> <p>This document does not specify the method for sampling.</p> <p>The methods specified in this document can be used to determine the moisture content of a sample in equilibrium with air at a specific temperature and humidity.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions, symboles et unités
    1
  • 3.1 Termes et définitions
    1
  • 3.2 Symboles et unités
    2
  • 4 Principe
    2
  • 4.1 Courbe de sorption
    2
  • 4.2 Courbe de désorption
    2
  • 5 Appareillage
    3
  • 5.1 Méthode du dessiccateur
    3
  • 5.2 Méthode de la chambre climatique
    3
  • 6 Éprouvettes
    3
  • 6.1 Caractéristiques de l'éprouvette
    3
  • 6.2 Nombre d'éprouvettes
    3
  • 7 Mode opératoire
    3
  • 7.1 Conditions d'essai
    3
  • 7.2 Méthode du dessiccateur
    4
  • 7.3 Méthode de la chambre climatique
    6
  • 8 Calculs et expression des résultats
    6
  • 8.1 Sorption hygroscopique
    6
  • 8.2 Courbes de teneur en eau d'équilibre
    7
  • 9 Exactitude de mesure
    7
  • 9.1 Erreur sur la teneur en eau
    7
  • 9.2 Contrôle des conditions ambiantes
    7
  • 10 Rapport d'essai
    8
  • Annexe A (informative) Humidités relatives de l'air au-dessus de solutions saturées à l'équilibre
    9
  • Annexe B (informative) Préparation de solutions saturées
    12
  • Annexe C (informative) Exemple de mode opératoire pour la détermination d'un point sur une courbe de sorption
    15
  • Annexe D (informative) Méthode utilisant un flacon en verre
    16
  • Bibliographie
    18
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ