NF EN ISO 12572
- Consult online for free
- Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
ISO 12572:2016 specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions. Different sets of test conditions are specified. The general principles are applicable to all hygroscopic and non-hygroscopic building materials and products, including insulation materials and including those with facings and integral skins. Annexes give details of test methods suitable for different material types. The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.
ISO 12572:2016 specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions. Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non-hygroscopic building materials and products, including insulation materials and including those with facings and integral skins. Annexes give details of test methods suitable for different material types.
The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.
Le présent document spécifie une méthode basée sur des essais en coupelle pour déterminer la perméance à la vapeur d'eau des produits pour le bâtiment ainsi que la perméabilité à la vapeur d'eau des minéraux pour le bâtiment dans des conditions isothermes. Ce document ne s'applique pas dans le cas d'éprouvettes dont l'épaisseur d'air équivalente pour la diffusion de la vapeur d'eau est inférieure à 0,1 m, du fait de l'incertitude croissante sur les résultats de mesure.
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes, définitions, symboles, unites et indices
-
4 Principe
-
5 Appareillage
-
6 Éprouvettes
-
7 Mode opératoire
-
8 Calcul et expression des résultats
-
9 Exactitude des mesures
-
10 Rapport d'essai
- Annexe A Méthodes applicables aux matériaux autoportants
- Annexe B Méthodes applicables aux matériaux en vrac
- Annexe C Méthodes applicables aux membranes et aux feuilles
- Annexe D Méthodes applicables aux mastics et aux produits de jointoiement
- Annexe E Méthodes applicables aux peintures, vernis, etc.
- Annexe F Correction de l'effet d'un bord masqué d'une éprouvette
- Annexe G Correction de résistance des couches d'air
- Annexe H Méthode de calcul de la résistance à la vapeur d'eau de la couche d'air dans la coupelle
- Annexe I Répétabilité de la pesée, intervalle entre deux pesées et taille des éprouvettes nécessaire pour obtenir l'exactitude désirée
- Annexe J Table de conversion des unités de transmission de vapeur d'eau
- Bibliographie
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ