NF EN ISO 12944-5

NF EN ISO 12944-5

November 2007
Standard Cancelled

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5 : protective paint systems

ISO 12944-5:2007 describes the types of paint and paint system commonly used for corrosion protection of steel structures. It also provides guidance for the selection of paint systems available for different environments and different surface preparation grades, and the durability grade to be expected. The durability of paint systems is classified in terms of low, medium and high.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2007

Number of pages

39 p.

Reference

NF EN ISO 12944-5

ICS Codes

87.020   Paint coating processes
25.220.10   Surface preparation

Classification index

T34-555-5

Print number

1 - 23/11/2007

International kinship

ISO 12944-5:2007

European kinship

EN ISO 12944-5:2007
Sumary
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5 : protective paint systems

ISO 12944-5:2007 describes the types of paint and paint system commonly used for corrosion protection of steel structures. It also provides guidance for the selection of paint systems available for different environments and different surface preparation grades, and the durability grade to be expected. The durability of paint systems is classified in terms of low, medium and high.

Replaced standards (1)
NF EN ISO 12944-5
October 1998
Standard Cancelled
Paints and varnishes. Corrosion protection of steel structure by protective paint systems. Part 5 : protective paint systems.

<p> La présente partie de l'ISO 12944 décrit les types de peinture et de systèmes de peinture les plus couramment utilisés pour la protection contre la corrosion des structures en acier. Elle constitue également un guide pour le choix de systèmes de peinture suivant l'environnement dans lesquels ils seront utilisés (voir ISO 12944-2), les qualités de préparation de surface (voir ISO 12944-4) et la durabilité prévisible (voir ISO 12944-1). La durabilité des systèmes de peinture est classée en termes de durabilité limitée, moyenne et haute. </p>

Standard replaced by (1)
NF EN ISO 12944-5
May 2018
Standard Cancelled
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5 : protective paint systems

<p>ISO 12944-5:2018 describes the types of paint and paint system commonly used for corrosion protection of steel structures.</p> <p>ISO 12944-5:2018 also gives guidelines for the selection of paint systems available for different environments (see ISO 12944‑2) except for corrosivity category CX and category Im4 as defined in ISO 12944‑2 and different surface preparation grades (see ISO 12944‑4), and the durability grade to be expected (see ISO 12944‑1).</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Types de peinture
    4
  • 4.1 Généralités
    4
  • 4.2 Peintures à durcissement réversible
    4
  • 4.3 Peintures à durcissement irréversible
    5
  • 4.4 Caractéristiques générales de différentes familles de peinture
    7
  • 5 Systèmes de peinture
    7
  • 5.1 Classification des environnements et des surfaces à peindre
    7
  • 5.2 Type de primaire
    8
  • 5.3 Systèmes de peinture à faible concentration en composés organiques volatils (COV)
    9
  • 5.4 Épaisseur du feuil sec
    9
  • 5.5 Durabilité
    10
  • 5.6 Application en atelier et sur site
    11
  • 6 Tableaux des systèmes de peinture protectrice
    11
  • 6.1 Lecture des tableaux des systèmes de peinture
    11
  • 6.2 Paramètres agissant sur la durabilité
    12
  • 6.3 Désignation des systèmes de peinture énumérés
    12
  • 6.4 Lignes directrices pour le choix du système de peinture adéquat
    13
  • Annexe A (informative) Systèmes de peinture
    14
  • Annexe B (informative) Primaires de préfabrication
    24
  • Annexe C (informative) Caractéristiques générales
    26
  • Annexe D (informative) Composés organiques volatils (COV)
    27
  • Bibliographie
    29
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ