NF EN ISO 13000-1

NF EN ISO 13000-1

March 2006
Standard Cancelled

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation

ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2006

Number of pages

17 p.

Reference

NF EN ISO 13000-1

ICS Codes

83.140.01   Rubber and plastics products in general

Classification index

T51-550-1

Print number

1 - 20/03/2006

International kinship

ISO 13000-1:2005

European kinship

EN ISO 13000-1:2005
Sumary
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation

ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

Replaced standards (1)
NF EN ISO 13000-1
July 1998
Standard Cancelled
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Part 1 : requirements and designation.

Standard replaced by (1)
NF EN ISO 13000-1
September 2021
Standard Current
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation

<p>This document establishes a system of designation for processed unfilled polytetrafluoroethylene (PTFE) products, which can occur in several forms.</p> <p>The PTFE used to make the semi-finished product is described in ISO 20568-1. The PTFE used to make the semi-finished product are virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant can be used.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Terminologie
    1
  • 3.1 Termes et définitions
    1
  • 3.2 Symboles et termes abrégés
    2
  • 4 Exigences relatives aux semi-produits en PTFE
    2
  • 4.1 Généralités
    2
  • 4.2 Dimensions et tolérances dimensionnelles
    2
  • 4.3 Résistance à la traction et pourcentage d'allongement à la rupture
    4
  • 4.4 Stabilité dimensionnelle
    4
  • 4.5 Masse volumique
    5
  • 4.6 Dureté
    5
  • 4.7 Couleur
    5
  • 4.8 Rigidité diélectrique (DS), tension de claquage et défauts électriques
    5
  • 4.9 Exigences pouvant être spécifiées en fonction de l'application spécifique
    7
  • 5 Présentation de la spécification
    7
  • 5.1 Généralités
    7
  • 5.2 Ordre de présentation des codes
    8
  • 5.3 Exemples de codage d'une spécification
    8
  • Annexe A (informative) Spécifications normatives relatives aux semi-produits en polytétrafluoroéthylène
    10
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ