NF EN ISO 13849-2

NF EN ISO 13849-2

December 2012
Standard Current

Safety of machinery - Safety-related parts of control systems - Part 2 : validation

ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation by analysis and testing of the specified safety functions, the category achieved, and the performance level achieved by the safety-related parts of a control system (SRP/CS) designed in accordance with ISO 13849-1.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

QSE, Sécurité, Gestion des risques et SST

Publication date

December 2012

Number of pages

95 p.

Reference

NF EN ISO 13849-2

ICS Codes

13.110   Safety of machinery

Classification index

E09-025-2

Print number

1 - 03/11/2012

International kinship

ISO 13849-2012

European kinship

EN ISO 13849-2:2012
Sumary
Safety of machinery - Safety-related parts of control systems - Part 2 : validation

ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation by analysis and testing of the specified safety functions, the category achieved, and the performance level achieved by the safety-related parts of a control system (SRP/CS) designed in accordance with ISO 13849-1.

Replaced standards (1)
NF EN ISO 13849-2
October 2008
Standard Cancelled
Safety of machinery - Safety-related parts of control systems - Part 2 : validation

<p>ISO 13849-2:2003 specifies the procedures and conditions to be followed for the validation by analysis and testing of:</p> <ol><li>the safety functions provided and</li><li>the category achieved</li></ol> <p>for the safety-related parts of the control system in compliance with EN 954-1 (ISO 13849-1), using the design rationale provided by the designer.</p> <p>This International Standard does not give complete validation requirements for programmable electronic systems and therefore can require the use of other standards.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Processus de validation
    1
  • 4.1 Principes de validation
    1
  • 4.2 Plan de validation
    3
  • 4.3 Listes des défauts génériques
    4
  • 4.4 Listes des défauts spécifiques
    4
  • 4.5 Informations pour la validation
    4
  • 4.6 Rapport de validation
    6
  • 5 Validation par analyse
    6
  • 5.1 Généralités
    6
  • 5.2 Techniques d'analyse
    7
  • 6 Validation par essais
    7
  • 6.1 Généralités
    7
  • 6.2 Précision des mesures
    8
  • 6.3 Exigences supérieures
    9
  • 6.4 Nombre d'échantillons
    9
  • 7 Validation de la spécification des exigences de sécurité pour les fonctions de sécurité
    9
  • 8 Validation des fonctions de sécurité
    10
  • 9 Validation des niveaux de performance et des catégories
    10
  • 9.1 Analyse et essais
    10
  • 9.2 Validation des spécifications relatives aux catégories
    11
  • 9.3 Validation du MTTFd, de la DCavg et de la CCF
    13
  • 9.4 Validation des mesures de prévention des défaillances systématiques relatives au niveau de performance et à la catégorie des SRP/CS
    14
  • 9.5 Validation du logiciel relatif à la sécurité
    14
  • 9.6 Validation et vérification du niveau de performance
    15
  • 9.7 Validation d'une combinaison de parties relatives à la sécurité
    15
  • 10 Validation des exigences d'environnement
    16
  • 11 Validation des exigences de maintenance
    16
  • 12 Validation de la documentation technique et des informations pour l'utilisation
    17
  • Annexe A (informative) Outils de validation pour les systèmes mécaniques
    18
  • Annexe B (informative) Outils de validation pour les systèmes pneumatiques
    23
  • Annexe C (informative) Outils de validation pour les systèmes hydrauliques
    33
  • Annexe D (informative) Outils de validation pour les systèmes électriques
    42
  • Annexe E (informative) Exemple de validation du comportement des défauts et des moyens de diagnostic
    56
  • Bibliographie
    84
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ