NF EN ISO 13855
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 13855:2010 establishes the positioning of safeguards with respect to the approach speeds of parts of the human body. It specifies parameters based on values for approach speeds of parts of the human body and provides a methodology to determine the minimum distances to a hazard zone from the detection zone or from actuating devices of safeguards. The values for approach speeds (walking speed and upper limb movement) in ISO 13855:2010 are time tested and proven in practical experience. ISO 13855:2010 gives guidance for typical approaches. Other types of approach, for example running, jumping or falling, are not considered in ISO 13855:2010. Safeguards considered in ISO 13855:2010 include: - electro-sensitive protective equipment, including light curtains and light grids (AOPDs), and laser scanners (AOPDDRs) and two-dimensional vision systems; - pressure-sensitive protective equipment, especially pressure-sensitive mats; - two-hand control devices; - interlocking guards without guard locking.
ISO 13855:2010 establishes the positioning of safeguards with respect to the approach speeds of parts of the human body.
It specifies parameters based on values for approach speeds of parts of the human body and provides a methodology to determine the minimum distances to a hazard zone from the detection zone or from actuating devices of safeguards.
The values for approach speeds (walking speed and upper limb movement) in ISO 13855:2010 are time tested and proven in practical experience. ISO 13855:2010 gives guidance for typical approaches. Other types of approach, for example running, jumping or falling, are not considered in ISO 13855:2010.
Safeguards considered in ISO 13855:2010 include:
- electro-sensitive protective equipment, including light curtains and light grids (AOPDs), and laser scanners (AOPDDRs) and two-dimensional vision systems;
- pressure-sensitive protective equipment, especially pressure-sensitive mats;
- two-hand control devices;
- interlocking guards without guard locking.
Le présent document définit les éléments à prendre en considération pour évaluer le temps d'obtention de l'arrêt et le temps d'accès à des éléments mobiles d'une machine en fonction des dispositifs de protection mis en oeuvre dans le cadre des dispositions réglementaires en vigueur en matière de prévention des accidents du travail. Il vient à l'appui des Directives "Machines 98/37/CE et 2006/42/CE.
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives2
-
3 Termes, définitions, symboles et termes abrégés2
-
3.1 Termes et définitions2
-
3.2 Termes abrégés et symboles4
-
4 Méthodologie5
-
5 Équation générale pour le calcul du temps de réponse global et des distances minimales7
-
5.1 Temps de réponse global7
-
5.2 Distance minimale8
-
6 Calcul des distances minimales pour un équipement de protection électrosensible utilisant des systèmes de protection optoélectroniques actifs8
-
6.1 Généralités8
-
6.2 Zone de détection perpendiculaire à la direction d'approche9
-
6.3 Zone de détection parallèle à la direction d'approche12
-
6.4 Zone de détection formant un angle avec la direction d'approche14
-
6.5 Prise en compte du contournement possible de l'équipement de protection électrosensible par atteinte par-dessus la zone de détection16
-
6.6 Approche indirecte - Trajectoire entre la zone de détection et la zone dangereuse limitée par des obstacles19
-
7 Méthode de calcul du positionnement des tapis ou planchers sensibles à la pression21
-
7.1 Généralités21
-
7.2 Montage sur des marches22
-
8 Dispositifs de commande bimanuelle22
-
9 Protecteurs sans dispositif d'interverrouillage22
- Annexe A (informative) Exemples d'application24
- Annexe B (informative) Interruption des fonctions dangereuses de la machine33
- Annexe C (informative) Exemple de prise en compte d'approches indirectes34
- Annexe D (informative) Mesurage et calcul du temps de réponse global36
- Annexe E (informative) Nombre de faisceaux et leur hauteur par rapport au plan de référence38
- Bibliographie39
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ