NF EN ISO 14253-1

NF EN ISO 14253-1

December 2017
Standard Current

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications

ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account. ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including: - workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both); - measuring equipment specifications (usually given as maximum permissible errors). ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2017

Number of pages

33 p.

Reference

NF EN ISO 14253-1

ICS Codes

17.040.10   Limits and fits
17.040.30   Measuring instruments
17.040.40   Geometrical Product Specification (GPS)

Classification index

E10-201-1

Print number

1

International kinship

ISO 14253-1:2017

European kinship

EN ISO 14253-1:2017
Sumary
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications

ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.

ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:

- workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);

- measuring equipment specifications (usually given as maximum permissible errors).

ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

Replaced standards (1)
NF EN ISO 14253-1
December 2013
Standard Cancelled
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : decision rules for proving conformity or nonconformity with specifications

Le présent document traite de la vérification des caractéristiques dimensionnelles des pièces. Il propose un ensemble de règles permettant de déterminer si une caractéristique d'un produit (pièce/population de pièces ou équipement de mesurage) est conforme ou non à la spécification, en tenant compte de l'incertitude de mesure. La situation du présent document dans la matrice GPS est donnée en Annexe A.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Règles de décision par défaut
  • 5 Contrôle de la conformité et de la non-conformité aux spécifications
  • 6 Application à la relation client/fournisseur
  • Annexe A (informative) Relation entre la 3 ème édition et la 2 ème édition
  • Annexe B (informative) Relation avec le modèle de matrice GPS
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ