NF EN ISO 14403-1
Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1 : method with flow injection analysis (FIA)
ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or using a different injection volume. In ISO 14403-1:2012, a suitable mass concentration range from 20 µg/l to 200 µg/l is described. Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.
ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or using a different injection volume.
In ISO 14403-1:2012, a suitable mass concentration range from 20 µg/l to 200 µg/l is described.
Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.
<p> La présente Norme internationale spécifie des méthodes pour le dosage des cyanures présents dans divers types d'eau (tels qu'eau souterraine, eau potable, eau de surface, lixiviat et eaux usées) en concentrations généralement supérieures à 3 µg/l, exprimées en ions cyanure. La méthode CFA est applicable à une gamme de concentrations comprises entre 10 µg/l et 100 µg/l. La gamme d'application peut être modifiée en faisant varier les conditions de fonctionnement. <br/> <br/>NOTE L'eau de mer peut être analysée avec des changements de sensibilité et l'adaptation des réactifs et des solutions d'étalonnage à la salinité des échantillons. </p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Interférences2
-
4.1 Interférences des agents oxydants2
-
4.2 Interférences des sulfures, des sulfites, des nitrites et des composés carbonylés2
-
4.3 Autres interférences2
-
5 Principe3
-
5.1 Dosage des cyanures totaux3
-
5.2 Dosage des cyanures libres3
-
6 Réactifs3
-
7 Appareillage6
-
8 Échantillonnage et préparation des échantillons7
-
9 Mode opératoire7
-
9.1 Réglage du dispositif en flux7
-
9.2 Mesurage du blanc réactif8
-
9.3 Contrôle de l'adéquation du dispositif en flux8
-
9.4 Étalonnage8
-
9.5 Mesurage des échantillons9
-
10 Calculs9
-
11 Expression des résultats9
-
12 Rapport d'essai10
- Annexe A (informative) Exemples de dispositifs en flux11
- Annexe B (normative) Détermination de la concentration réelle en cyanure de la solution de cyanure de potassium (6.18.1)12
- Annexe C (informative) Données de performance13
- Bibliographie15
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ