NF EN ISO 14403-2
Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2 : method using continuous flow analysis (CFA)
ISO 14403-2:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations usually from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or changing the pathlength of the flow cell. In this method, a suitable mass concentration range from10 µg/l to 100 µg/l is described. Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.
ISO 14403-2:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations usually from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or changing the pathlength of the flow cell.
In this method, a suitable mass concentration range from10 µg/l to 100 µg/l is described.
Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.
<p> La présente Norme internationale spécifie des méthodes pour le dosage des cyanures présents dans divers types d'eau (tels qu'eau souterraine, eau potable, eau de surface, lixiviat et eaux usées) en concentrations généralement supérieures à 3 µg/l, exprimées en ions cyanure. La méthode CFA est applicable à une gamme de concentrations comprises entre 10 µg/l et 100 µg/l. La gamme d'application peut être modifiée en faisant varier les conditions de fonctionnement. <br/> <br/>NOTE L'eau de mer peut être analysée avec des changements de sensibilité et l'adaptation des réactifs et des solutions d'étalonnage à la salinité des échantillons. </p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Interférences2
-
4.1 Interférences des agents oxydants2
-
4.2 Interférences des sulfures, des sulfites, des nitrites et des composés carbonylés2
-
4.3 Autres interférences3
-
5 Principe3
-
5.1 Dosage des cyanures totaux3
-
5.2 Dosage des cyanures libres3
-
6 Réactifs3
-
7 Appareillage7
-
8 Échantillonnage et préparation des échantillons9
-
9 Mode opératoire9
-
9.1 Réglage du dispositif en flux9
-
9.2 Mesurage du blanc réactif10
-
9.3 Contrôle de l'adéquation du dispositif en flux10
-
9.4 Étalonnage11
-
9.5 Mesurage des échantillons11
-
10 Calculs11
-
11 Expression des résultats12
-
12 Rapport d'essai12
- Annexe A (informative) Exemples de dispositifs en flux13
- Annexe B (normative) Détermination de la concentration réelle en cyanure de la solution de cyanure de potassium16
- Annexe C (informative) Exemple de dosage des cyanures totaux et des cyanures libres par analyse en flux continu (CFA) avec diffusion du gaz et détection ampérométrique17
- Annexe D (informative) Données de performance19
- Bibliographie21
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ