NF EN ISO 14403
Water quality - Determination of total cyanide and free cyanide by continuous flow analysis
La présente Norme internationale spécifie des méthodes pour le dosage des cyanures présents dans divers types d'eau (tels qu'eau souterraine, eau potable, eau de surface, lixiviat et eaux usées) en concentrations généralement supérieures à 3 µg/l, exprimées en ions cyanure. La méthode CFA est applicable à une gamme de concentrations comprises entre 10 µg/l et 100 µg/l. La gamme d'application peut être modifiée en faisant varier les conditions de fonctionnement. NOTE L'eau de mer peut être analysée avec des changements de sensibilité et l'adaptation des réactifs et des solutions d'étalonnage à la salinité des échantillons.
La présente Norme internationale spécifie des méthodes pour le dosage des cyanures présents dans divers types d'eau (tels qu'eau souterraine, eau potable, eau de surface, lixiviat et eaux usées) en concentrations généralement supérieures à 3 µg/l, exprimées en ions cyanure. La méthode CFA est applicable à une gamme de concentrations comprises entre 10 µg/l et 100 µg/l. La gamme d'application peut être modifiée en faisant varier les conditions de fonctionnement.
NOTE L'eau de mer peut être analysée avec des changements de sensibilité et l'adaptation des réactifs et des solutions d'étalonnage à la salinité des échantillons.
<p>ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or using a different injection volume.</p> <p>In ISO 14403-1:2012, a suitable mass concentration range from 20 µg/l to 200 µg/l is described.</p> <p>Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.</p>
<p>ISO 14403-2:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations usually from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be changed by varying the operation conditions, e.g. by diluting the original sample or changing the pathlength of the flow cell.</p> <p>In this method, a suitable mass concentration range from10 µg/l to 100 µg/l is described.</p> <p>Seawater can be analysed with possible changes in sensitivity and adaptation of the reagent and calibration solutions to the salinity of the samples.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ