NF EN ISO 1452-1

NF EN ISO 1452-1

January 2010
Standard Current

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general

ISO 1452-1:2009 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC‑U) solid-wall piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. In conjunction with ISO 1452-2, ISO 1452-3, ISO 1452-4 and ISO 1452-5, it is applicable to PVC‑U pipes, fittings, valves and ancillary equipment, their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following: - water mains and services buried in the ground; - conveyance of water above ground for both outside and inside buildings; - buried and above ground drainage and sewerage under pressure. It is applicable to piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for general purposes as well as for waste water under pressure. It is also applicable to components for the conveyance of water and waste water up to and including 45 °C.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2010

Number of pages

19 p.

Reference

NF EN ISO 1452-1

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems
91.140.80   Drainage systems

Classification index

T54-016-1

Print number

1 - 18/01/2010

International kinship

ISO 1452-1:2009

European kinship

EN ISO 1452-1:2009
Sumary
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general

ISO 1452-1:2009 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC‑U) solid-wall piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure.

In conjunction with ISO 1452-2, ISO 1452-3, ISO 1452-4 and ISO 1452-5, it is applicable to PVC‑U pipes, fittings, valves and ancillary equipment, their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following:

- water mains and services buried in the ground;

- conveyance of water above ground for both outside and inside buildings;

- buried and above ground drainage and sewerage under pressure.

It is applicable to piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for general purposes as well as for waste water under pressure. It is also applicable to components for the conveyance of water and waste water up to and including 45 °C.

Replaced standards (2)
NF EN 1456-1
October 2001
Standard Cancelled
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system

Le présent document spécifie les aspects généraux des systèmes de canalisations en poly(chlorure de vinyle) non plastifié (PVC-U) dans le domaine de l'assainissement enterré et aérien avec pression.

NF EN 1452-1
November 1999
Standard Cancelled
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general

Le présent document précise les aspects généraux de la matière plastique de poly(chlorure de vinyle) non plastifié (PVC-U). Il est applicable aux systèmes de canalisations pour l'alimentation en eau destinée à la consommation humaine, jusqu'à 45 °C inclus.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions, symboles et abréviations
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles
    6
  • 3.3 Abréviations
    7
  • 4 Matière
    7
  • 4.1 Exigences générales pour les composants ou les formulations
    7
  • 4.2 Exigence spéciale pour les compositions ou les formulations des éléments en contact avec l'eau potable
    8
  • 4.3 Utilisation de matière rebroyée et recyclable
    8
  • 4.4 Classification et vérification de matières
    8
  • Bibliographie
    11
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ