ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following: sheet, wire and woven or welded mesh products that are continuously hot dip galvanized; tube and pipe that are hot dip galvanized in automatic plants; hot dip galvanized products (e.g. fasteners) for which specific standards exist and which might include additional requirements or requirements which are different from those of ISO 1461:2009. After-treatment/over-coating of hot dip galvanized articles is not covered by ISO 1461:2009.
ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following:
After-treatment/over-coating of hot dip galvanized articles is not covered by ISO 1461:2009.
<p> La présente norme spécifie les propriétés générales et les méthodes d'essais relatives aux revêtements appliqués par immersion à chaud dans le zinc (ne contenant pas plus de 2 % d'autres métaux) sur des produits finis en fer et en acier. Elles ne s'appliquent pas : </p> <p>a) aux tôles et aux fils galvanisés à chaud en continu ; </p> <p>b) aux tubes et canalisations galvanisés à chaud dans des usines automatisées ; </p> <p>c) aux produits galvanisés à chaud pour lesquels des normes spécifiques existent pouvant inclure des prescriptions supplémentaires ou différentes de celles contenues dans la présente norme européenne.</p> <p>NOTE : Des normes de produits peuvent incorporer cette norme de revêtement en citant son numéro ou peuvent l'incorporer avec des modifications spécifiques au produit. Les post-traitements/revêtements sur produits galvanisés à chaud ne sont pas traités dans la présente norme. </p>
<p>This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following:</p> <p>a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;</p> <p>b) tube and pipe that are hot dip galvanized in automatic plants;</p> <p>c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document.</p> <p>NOTE Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements.</p> <p>This document does not apply to after-treatment or additional coating of hot dip galvanized articles.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ