NF EN ISO 15001

NF EN ISO 15001

November 2004
Standard Cancelled

Anaesthetic and respiratory equipment - Compatibility with oxygen

ISO 15001:2003 specifies minimum requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications which can come in contact with oxygen in normal condition or in single fault condition at gas pressures greater than 50 kPa. ISO 15001:2003 is applicable to anaesthetic and respiratory equipment which are within the scope of ISO/TC 121, e.g. medical gas pipeline systems, pressure regulators, terminal units, medical supply units, flexible connections, flow-metering devices, anaesthetic workstations and lung ventilators. Aspects of compatibility that are addressed by ISO 15001:2003 include cleanliness, resistance to ignition and the toxicity of products of combustion and/or decomposition.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2004

Number of pages

51 p.

Reference

NF EN ISO 15001

ICS Codes

11.040.10   Anaesthetic, respiratory and reanimation equipment

Classification index

S95-147

Print number

1 - 06/09/2005

International kinship

ISO 15001:2003

European kinship

EN ISO 15001:2004
Sumary
Anaesthetic and respiratory equipment - Compatibility with oxygen

ISO 15001:2003 specifies minimum requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications which can come in contact with oxygen in normal condition or in single fault condition at gas pressures greater than 50 kPa.

ISO 15001:2003 is applicable to anaesthetic and respiratory equipment which are within the scope of ISO/TC 121, e.g. medical gas pipeline systems, pressure regulators, terminal units, medical supply units, flexible connections, flow-metering devices, anaesthetic workstations and lung ventilators.

Aspects of compatibility that are addressed by ISO 15001:2003 include cleanliness, resistance to ignition and the toxicity of products of combustion and/or decomposition.

Standard replaced by (1)
NF EN ISO 15001
July 2010
Standard Cancelled
Anaesthetic and respiratory equipment - Compatibility with oxygen

<p>ISO 15001:2010 specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications, which can come into contact with oxygen in normal condition or in single fault condition at gas pressures greater than 50 kPa.</p> <p>Additionally, ISO 15001:2010 gives general guidelines for the selection of materials and components based on available data on their oxygen compatibility, and for carrying out a risk analysis, including addressing the toxicity of products of combustion and/or decomposition.</p> <p>Aspects of compatibility that are addressed by ISO 15001:2010 include cleanliness, resistance to ignition and the toxicity of products of combustion and/or decomposition at the design, manufacturing, maintenance and disposal stages.</p> <p>ISO 15001:2010 is applicable to anaesthetic and respiratory equipment that is within the scope of ISO/TC 121, e.g. medical gas pipeline systems, pressure regulators, terminal units, medical supply units, flexible connections, flow-metering devices, anaesthetic workstations and lung ventilators.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Propreté
    2
  • 5 Résistance à l'inflammation
    3
  • 6 Analyse des risques
    3
  • Annexe A (informative) Exemples de modes de nettoyage
    4
  • Annexe B (informative) Méthodes habituelles de validation des modes de nettoyage
    12
  • Annexe C (informative) Conception
    15
  • Annexe D (informative) Choix des matériaux
    21
  • Annexe E (informative) Méthode d'essai recommandée pour la combustion et l'analyse quantitative des produits de combustion de matériaux non métalliques
    33
  • Annexe F (informative) Justification
    38
  • Bibliographie
    39
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ