NF EN ISO 15136-2

NF EN ISO 15136-2

August 2010
Standard Current

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2 : surface-drive systems

ISO 15136-2:2006 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface drive systems for use in the petroleum and natural gas industry. ISO 15136-2:2006 is applicable to those products meeting the definition of surface drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use. Equipment not covered by ISO 15136-2:2006, unless integral by design, includes bottom drive systems, sucker rods, polished rod clamps, stuffing boxes, electrical controls, instrumentation, external power transmission devices, auxiliary equipment, such as belts, sheaves and equipment guards. These items might or might not be covered by other International Standards.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2010

Number of pages

59 p.

Reference

NF EN ISO 15136-2

ICS Codes

75.180.10   Exploratory, drilling and extraction equipment

Classification index

M87-237-2

Print number

1 - 20/08/2010

International kinship

ISO 15136-2:2006

European kinship

EN ISO 15136-2:2006
Sumary
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2 : surface-drive systems

ISO 15136-2:2006 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface drive systems for use in the petroleum and natural gas industry. ISO 15136-2:2006 is applicable to those products meeting the definition of surface drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use.

Equipment not covered by ISO 15136-2:2006, unless integral by design, includes bottom drive systems, sucker rods, polished rod clamps, stuffing boxes, electrical controls, instrumentation, external power transmission devices, auxiliary equipment, such as belts, sheaves and equipment guards. These items might or might not be covered by other International Standards.

Table of contents
View the extract
  • Avant-propos
    v
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Abréviations
    6
  • 5 Spécification fonctionnelle
    6
  • 5.1 Généralités
    6
  • 5.2 Sélection du type de système d'entraînement en surface
    6
  • 5.3 Caractéristiques fonctionnelles
    7
  • 5.4 Compatibilité environnementale
    7
  • 5.5 Compatibilité avec les équipements de puits correspondants
    7
  • 5.6 Validation de la conception et essais fonctionnels du produit
    8
  • 5.7 Documentation de maîtrise de la qualité
    8
  • 6 Spécification technique
    8
  • 6.1 Exigences générales
    8
  • 6.2 Caractéristiques techniques
    8
  • 6.3 Critères de conception
    9
  • 6.4 Vérification de la conception
    10
  • 6.5 Validation de la conception
    10
  • 6.6 Essai fonctionnel du produit
    11
  • 6.7 Essais supplémentaires
    11
  • 6.8 Modifications de conception admissibles
    11
  • 6.9 Mise à l'échelle de la conception
    12
  • 7 Exigences du fournisseur
    12
  • 7.1 Généralités
    12
  • 7.2 Maîtrise des documents et des données
    12
  • 7.3 Identification du produit
    13
  • 7.4 Documentation de maîtrise de la qualité
    14
  • 7.5 Vérification de la conception
    18
  • 7.6 Essais fonctionnels du produit
    18
  • 8 Réparation
    18
  • 9 Préparation pour expédition
    18
  • 10 Changement d'application du produit
    18
  • Annexe A (normative) Exigences applicables aux élastomères et aux matériaux non métalliques
    19
  • Annexe B (informative) Méthode d'évaluation du système de freinage
    21
  • Annexe C (informative) Recommandations pour l'installation
    35
  • Annexe D (informative) Recommandations d'exploitation
    37
  • Annexe E (informative) Recommandations relatives à la sélection des équipements
    39
  • Annexe F (informative) Formulaire de spécifications fonctionnelles de l'utilisateur/acheteur
    40
  • Annexe G (informative) Méthodes d'essai du système de freinage
    43
  • Annexe H (informative) Sélection et utilisation des tiges de pompage dans les applications de pompage rotatif PCP
    46
  • Bibliographie
    51
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ