NF EN ISO 15156-3

NF EN ISO 15156-3

August 2011
Standard Current

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 15156-3:2009 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S‑containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. ISO 15156-3:2009 can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. ISO 15156-3:2009 addresses the resistance of these materials to damage that can be caused by sulfide stress‑cracking (SSC), stress‑corrosion cracking (SCC) and galvanically induced hydrogen stress cracking (GHSC). ISO 15156-3:2009 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. A non-exhaustive list of equipment is given to which this part of ISO 15156 is applicable, including permitted exclusions. ISO 15156-3:2009 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain‑based and limit‑state designs), see ISO 15156-1:2009, Clause 5. ISO 15156-3:2009 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2011

Number of pages

93 p.

Reference

NF EN ISO 15156-3

ICS Codes

75.180.01   Equipment for petroleum and natural gas industries in general

Classification index

M87-229-3

Print number

1 - 08/08/2011

International kinship

ISO 15156-3:2009

European kinship

EN ISO 15156-3:2009
Sumary
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 15156-3:2009 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S‑containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. ISO 15156-3:2009 can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.

ISO 15156-3:2009 addresses the resistance of these materials to damage that can be caused by sulfide stress‑cracking (SSC), stress‑corrosion cracking (SCC) and galvanically induced hydrogen stress cracking (GHSC).

ISO 15156-3:2009 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.

A non-exhaustive list of equipment is given to which this part of ISO 15156 is applicable, including permitted exclusions.

ISO 15156-3:2009 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain‑based and limit‑state designs), see ISO 15156-1:2009, Clause 5.

ISO 15156-3:2009 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Replaced standards (1)
NF EN ISO 15156-3
July 2004
Standard Cancelled
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

<p>ISO 15156-3:2003 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment, used in oil and natural gas production and natural gas treatment plants in H<sub>2</sub>S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations.</p> <p>ISO 15156-3:2003 addresses the resistance of these materials to damage that may be caused by sulfide stress-cracking, stress-corrosion cracking and galvanically-induced hydrogen stress-cracking. </p> <p>ISO 15156-3:2003 is only concerned with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.</p> <p>Table 1 provides a non-exhaustive list of equipment to which ISO 15156-3:2003 is applicable, including permitted exclusions.</p> <p>ISO 15156-3:2003 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs) see ISO 15156-1:2001, Clause 5. </p> <p>ISO 15156-3:2003 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    4
  • 4 Symboles et termes abrégés
    5
  • 5 Facteurs affectant la résistance à la fissuration des alliages résistant à la corrosion (ARC) et d'autres alliages dans les milieux contenant de l'hydrogène sulfuré (H2S)
    6
  • 6 Qualification et sélection des alliages ARC et des autres alliages par rapport au risque de rupture différée par H2S (SSC), de corrosion fissurante sous contrainte (SCC) et de rupture différée par l'hydrogène induite par couplage galvanique (GHSC) dans les milieux contenant de l'H2S
    6
  • 6.1 Généralités
    6
  • 6.2 Évaluation des propriétés des matériaux
    7
  • 6.3 PREN
    10
  • 7 Informations d'achat et marquage
    10
  • 7.1 Renseignements qu'il convient de fournir pour l'achat de matériaux
    10
  • 7.2 Marquages, étiquetage et documentation
    11
  • Annexe A (normative) Alliages ARC et autres alliages résistants à la fissuration induite par l'environnement (comprenant le Tableau A.1 - Guide d'utilisation des tableaux de sélection des matériaux de l'Annexe A)
    12
  • Annexe B (normative) Qualification des aciers ARC pour un service en milieu H2S par des essais en laboratoire
    58
  • Annexe C (informative) Informations qu'il est recommandé de fournir pour l'achat de matériaux
    70
  • Annexe D (informative) Compositions chimiques des matériaux et autres informations
    72
  • Annexe E (informative) Ensembles proposés de conditions d'essais
    84
  • Bibliographie
    85
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ