NF EN ISO 15877-1

NF EN ISO 15877-1

May 2009
Standard Current

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : general

ISO 15877-1:2009 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application. It covers a range of service conditions (classes of application), design pressures and pipe dimension classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given. ISO 15877-1:2009 also specifies the test parameters for the test methods to which it refers. In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes and fittings, their joints and joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2009

Number of pages

22 p.

Reference

NF EN ISO 15877-1

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems

Classification index

T54-014-1

Print number

1 - 22/06/2010

International kinship

ISO 15877-1:2009

European kinship

EN ISO 15877-1:2009
Sumary
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : general

ISO 15877-1:2009 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application.

It covers a range of service conditions (classes of application), design pressures and pipe dimension classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given. ISO 15877-1:2009 also specifies the test parameters for the test methods to which it refers.

In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes and fittings, their joints and joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Replaced standards (1)
NF EN ISO 15877-1
June 2004
Standard Cancelled
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : general

Le présent document spécifie les exigences générales des systèmes de canalisations en poly(chlorure de vinyle) chloré (PVC-C) destinés aux installations d'eau chaude et froide à l'intérieur des bâtiments ainsi qu'au transport de l'eau destinée ou non à la consommation humaine (systèmes domestiques), et aux installations de chauffage à des pressions et des températures de service correspondant à la classe d'application.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions' symboles et termes abrégés
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles et termes abrégés
    6
  • 4 Classification des conditions de service
    7
  • 5 Caractéristiques de la matière
    8
  • 5.1 Généralités
    8
  • 5.2 Masse volumique
    9
  • 5.3 Teneur en chlore
    9
  • 5.4 Propriétés de la contrainte hydrostatique
    9
  • 5.5 Vérification de la température de dysfonctionnement
    9
  • 5.6 Influence sur l'eau destinée à la consommation humaine
    9
  • 5.7 Matière rebroyée et recyclée
    9
  • Annexe A (normative) Méthode d'essai de la vérification de la température de dysfonctionnement, Tmal' de la résine PVC-C de Type I
    10
  • Bibliographie
    12
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ