NF EN ISO 15877-2

NF EN ISO 15877-2

May 2009
Standard Current

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes

ISO 15877-2:2009 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application. ISO 15877-2:2009 covers a range of service conditions (application classes), design pressures and pipe series. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15877-1:2009. ISO 15877-2:2009 also specifies the test parameters for the test methods to which it refers. In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes, their joints and joints with components of PVC-C, other plastics and non-plastics materials intended to be used for hot and cold water installations.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2009

Number of pages

26 p.

Reference

NF EN ISO 15877-2

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems

Classification index

T54-014-2

Print number

1 - 22/06/2010

International kinship

ISO 15877-2:2009

European kinship

EN ISO 15877-2:2009
Sumary
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes

ISO 15877-2:2009 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application.

ISO 15877-2:2009 covers a range of service conditions (application classes), design pressures and pipe series. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15877-1:2009. ISO 15877-2:2009 also specifies the test parameters for the test methods to which it refers.

In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes, their joints and joints with components of PVC-C, other plastics and non-plastics materials intended to be used for hot and cold water installations.

Replaced standards (1)
NF EN ISO 15877-2
June 2004
Standard Cancelled
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes

Le présent document spécifie les caractéristiques des tubes en poly(chlorure de vinyle) chloré (PVC-C) pour les systèmes de canalisations destinés aux installations d'eau chaude et froide à l'intérieur des bâtiments ainsi qu'au transport de l'eau destinée ou non à la consommation humaine (systèmes domestiques), et aux installations de chauffage à des pressions et des températures de service correspondant à la classe d'application.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes définitions et symboles
    2
  • 4 Caractéristiques de la matière
    2
  • 4.1 Généralités
    2
  • 4.2 Matière des tubes
    2
  • 4.3 Évaluation des valeurs sigma LPL
    3
  • 4.4 Influence sur l'eau destinée à la consommation humaine
    6
  • 5 Caractéristiques générales
    6
  • 5.1 Aspect
    6
  • 5.2 Chanfreinage
    6
  • 5.3 Opacité
    6
  • 6 Caractéristiques géométriques
    6
  • 6.1 Généralités
    6
  • 6.2 Dimensions des tubes
    7
  • 6.3 Épaisseurs de paroi et leurs tolérances
    7
  • 7 Caractéristiques mécaniques
    9
  • 7.1 Résistance à la pression interne
    9
  • 7.2 Résistance au choc
    10
  • 7.3 Résistance à la traction
    10
  • 8 Caractéristiques physiques
    11
  • 9 Exigences d'aptitude à l'emploi
    11
  • 10 Colles
    12
  • 11 Marquage
    12
  • 11.1 Généralités
    12
  • 11.2 Marquage minimal exigé
    12
  • 11.3 Marquage supplémentaire
    13
  • Annexe A (informative) Détermination de la valeur maximale calculée de la série du tube' Scalc,max
    14
  • Bibliographie
    16
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ