NF EN ISO 16000-10
Indoor air - Part 10 : determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method
ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to the definition of an emission test cell, it is also possible to perform non-destructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in ISO 16000-10:2006. An example of an emission test cell is described. ISO 16000-10:2006 is also applicable to wood-based panels and other building products, in order to determine the emission rate of formaldehyde.
ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room.
According to the definition of an emission test cell, it is also possible to perform non-destructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in ISO 16000-10:2006. An example of an emission test cell is described.
ISO 16000-10:2006 is also applicable to wood-based panels and other building products, in order to determine the emission rate of formaldehyde.
Le présent document définit une méthode d'essai en laboratoire permettant de déterminer le débit d'émission spécifique par unité de surface, de composés organiques volatils provenant des produits de construction nouvellement fabriqués ou éventuellement de produits vieillis, dans des conditions d'environnement définies. Cette deuxième partie présente la méthode de la cellule d'essai d'émission.
- Avant-proposiv
- Introductionvi
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Symboles et termes abrégés4
-
5 Principe4
-
6 Système de cellule d'essai d'émission4
-
7 Appareillage6
-
8 Conditions d'essai6
-
9 Vérification des conditions d'essai7
-
10 Éprouvettes d'essai8
-
11 Préparation de la cellule d'essai d'émission8
-
12 Méthode d'essai8
-
13 Calcul des débits d'émission spécifiques par unité de surface et expression des résultats9
-
14 Caractéristiques de performances10
-
15 Rapport d'essai10
- Annexe A (normative) Système d'assurance qualité 1 contrôle qualité12
- Annexe B (informative) Exemples de débits d'air spécifiques par unité de surface dans une pièce modèle14
- Annexe C (informative) Exemple de cellule d'essai d'émission15
- Bibliographie17
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ