NF EN ISO 16474-3

NF EN ISO 16474-3

January 2014
Standard Cancelled

Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps

ISO 16474-3:2013 specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass. The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp may be used to meet all the requirements for testing different materials. Specimen preparation and evaluation of the results are covered in other ISO documents for specific materials. General guidance is given in ISO 16474‑1. Fluorescent UV lamp exposures for plastics are described in ISO 4892‑3.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2014

Number of pages

24 p.

Reference

NF EN ISO 16474-3

ICS Codes

87.040   Paints and varnishes

Classification index

T30-089-3

Print number

1

International kinship

ISO 16474-3:2013

European kinship

EN ISO 16474-3:2013
Sumary
Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps

ISO 16474-3:2013 specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass.

The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp may be used to meet all the requirements for testing different materials.

Specimen preparation and evaluation of the results are covered in other ISO documents for specific materials.

General guidance is given in ISO 16474‑1. Fluorescent UV lamp exposures for plastics are described in ISO 4892‑3.

Replaced standards (1)
NF EN ISO 11507
April 2007
Standard Cancelled
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water

<p>ISO 11507:2007 specifies exposure conditions for paint coatings exposed to artificial weathering in apparatus including fluorescent UV lamps and condensation or water spray. The effects of weathering are evaluated separately by comparative testing of chosen parameters.</p>

Standard replaced by (1)
NF EN ISO 16474-3
January 2021
Standard Current
Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps

<p>This document specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass.</p> <p>The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp can be used to meet all the requirements for testing different materials.</p> <p>Specimen preparation and evaluation of the results are covered in other ISO documents for specific materials.</p> <p>General guidance is given in ISO 16474‑1.</p> <p>NOTE Fluorescent UV lamp exposures for plastics are described in ISO 4892‑3.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    2
  • 5 Appareillage
    3
  • 6 Éprouvettes d'essai (panneaux)
    7
  • 7 Conditions d'essai
    8
  • 8 Mode opératoire et montage des éprouvettes d'essai
    10
  • 9 Rapport d'essai
    11
  • Annexe A (informative) Lampes fluorescentes UV caractéristiques - Répartition spectrale
    12
  • Bibliographie
    16
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ