NF EN ISO 17635

NF EN ISO 17635

May 2010
Standard Cancelled

Non-destructive testing of welds - General rules for metallic materials

ISO 17635:2010 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process, and extent of testing. ISO 17635:2010 also specifies general rules and standards to be applied to the different types of testing, for either the methodology or the acceptance level for metallic materials. Acceptance levels cannot be a direct interpretation of the quality levels defined in ISO 5817 or ISO 10042. They are linked to the overall quality of the produced batch of welds. Requirements for acceptance levels for NDT comply with quality levels stated in ISO 5817 or ISO 10042 (moderate, intermediate, stringent) only on a general basis and not in detail for each indication. One annex gives correlations between quality, NDT and acceptance level standards. A second annex gives an overview of the standards linked to quality levels, acceptance levels, and NDT methods.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2010

Number of pages

24 p.

Reference

NF EN ISO 17635

ICS Codes

25.160.40   Welded joints and welds
77.040.20   Non-destructive testing of metals

Classification index

A89-500

Print number

1 - 06/05/2010

International kinship

ISO 17635:2010

European kinship

EN ISO 17635:2010
Sumary
Non-destructive testing of welds - General rules for metallic materials

ISO 17635:2010 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process, and extent of testing.

ISO 17635:2010 also specifies general rules and standards to be applied to the different types of testing, for either the methodology or the acceptance level for metallic materials.

Acceptance levels cannot be a direct interpretation of the quality levels defined in ISO 5817 or ISO 10042. They are linked to the overall quality of the produced batch of welds.

Requirements for acceptance levels for NDT comply with quality levels stated in ISO 5817 or ISO 10042 (moderate, intermediate, stringent) only on a general basis and not in detail for each indication.

One annex gives correlations between quality, NDT and acceptance level standards.

A second annex gives an overview of the standards linked to quality levels, acceptance levels, and NDT methods.

Replaced standards (3)
NF EN 12062
October 1997
Standard Cancelled
Non-destructive examination of welds. General rules for metallic materials.

Le présent document donne des indications pour le choix de la méthode de contrôle non destructif des assemblages soudés et l'évaluation des résultats dans le cadre du contrôle qualité. Il spécifie également les règles générales et les normes applicables pour différents types de contrôles, tant du point de vue de la méthodologie que des niveaux d'acceptation pour les matériaux métalliques.

NF EN 12062/A1
June 2003
Standard Cancelled
Non-destructive examination of welds - General rules for metallic materials

Le présent amendement a pour but principal d'ajouter l'annexe ZA relative aux directives UE 97/23/CE et 87/404/CEE.

NF EN 12062/A2
July 2004
Standard Cancelled
Non-destructive examination of welds - General rules for metallic materials

Le présent document donne des indications pour le choix de la méthode de contrôle non destructif des assemblages soudés et l'évaluation des résultats dans le cadre du contrôle qualité. Il spécifie également les règles générales et les normes applicables pour différents types de contrôles, tant du point de vue de la méthodologie que des niveaux d'acceptation pour les matériaux métalliques.

Standard replaced by (1)
NF EN ISO 17635
February 2017
Standard Current
Non-destructive testing of welds - General rules for metallic materials

<p>ISO 17635:2016 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process and extent of testing.</p> <p>ISO 17635:2016 also specifies general rules and standards to be applied to the different types of testing, for either the methodology or the acceptance levels for metallic materials.</p> <p>Acceptance levels cannot be a direct interpretation of the quality levels defined in ISO 5817 or ISO 10042. They are linked to the overall quality of the produced batch of welds.</p> <p>Requirements for acceptance levels for NDT comply with quality levels stated in ISO 5817 or ISO 10042 (moderate, intermediate, stringent) only on a general basis and not in detail for each indication.</p> <p>Annex A gives correlations between quality, NDT and acceptance level standards.</p> <p>Annex B gives an overview of the standards linked to quality levels, acceptance levels and NDT methods.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Abréviations
    3
  • 5 Limites
    4
  • 5.1 Stade de fabrication
    4
  • 5.2 Étendue des essais
    4
  • 5.3 Matériaux
    4
  • 6 Qualification du personnel
    4
  • 7 Organisation de contrôle
    4
  • 8 Documentation
    4
  • 8.1 Documentation avant les essais
    4
  • 8.2 Documentation après les essais
    5
  • 9 Choix des méthodes d'essai
    5
  • 9.1 Généralités
    5
  • 9.2 Assemblages bout à bout et en T à pénétration totale
    6
  • 9.3 Assemblages bout à bout et en T à pénétration partielle, et soudures d'angle
    7
  • 10 Exécution de l'essai
    7
  • 10.1 Détermination de la norme applicable
    7
  • 10.2 Conditions d'essai
    7
  • 10.3 Moment d'exécution de l'essai
    7
  • 10.4 Indications non acceptables
    8
  • Annexe A (normative) Règles et normes applicables
    9
  • Annexe B (informative) Graphique du contexte normatif
    13
  • Annexe C (informative) Indications non acceptables
    17
  • Bibliographie
    18
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ