NF EN ISO 17638
Non-destructive testing of welds - Magnetic particle testing
ISO 17638:2003 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for most welding processes and joint configurations.
ISO 17638:2003 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for most welding processes and joint configurations.
Le présent document spécifie les méthodes de contrôle pour la détection des défauts de surface par magnétoscopie des soudures dans les matériaux ferromagnétiques, y compris les zones affectées thermiquement à l'aide de la méthode de magnétisation par passage de courant.
Le présent document ajoute l'annexe ZA relative aux Directives UE 97/23/CE et 87/404/CEE et modifie les articles et les paragraphes suivants : 2, 5.1.1, 5.4.1, 5.4.2, 5.5.1, 5.5.2, 5.7, 5.9, 5.12, 5.13, A.2.
Le présent document spécifie les méthodes de contrôle pour la détection des défauts de surface par magnétoscopie des soudures dans les matériaux ferromagnétiques, y compris les zones affectées thermiquement à l'aide de la méthode de magnétisation par passage de courant.
<p>ISO 17638:2016 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for most welding processes and joint configurations. Variations in the basic techniques that will provide a higher or lower test sensitivity are described in Annex A.</p> <p>ISO 17638:2016 does not specify acceptance levels of the indications. Further information on acceptance levels for indications may be found in ISO 23278 or in product or application standards.</p>
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Règles de sécurité1
-
5 Généralités2
-
5.1 Informations exigées avant contrôle2
-
5.2 Informations complémentaires avant contrôle2
-
5.3 Qualification du personnel2
-
5.4 État et préparation des surfaces2
-
5.5 Aimantation3
-
5.6 Techniques d'application4
-
5.7 Révélateurs9
-
5.8 Conditions d'observation10
-
5.9 Application des révélateurs10
-
5.10 Contrôle global des performances10
-
5.11 Fausses indications10
-
5.12 Enregistrement des indications11
-
5.13 Désaimantation11
-
5.14 Rapport d'essai11
- Annexe A (informative) Variables affectant la sensibilité du contrôle par magnétoscopie13
- Bibliographie15
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ