NF EN ISO 18233
Acoustic - Application of new measurement methods in building and room acoustics
ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection of the excitation signal, signal processing and environmental control are given, together with requirements for linearity and time-invariance for the systems to be tested. ISO 18233:2006 is applicable to such measurements as airborne sound insulation between rooms and of façades, measurement of reverberation time and other acoustic parameters of rooms, measurement of sound absorption in a reverberation room, and measurement of vibration level differences and loss factor. ISO 18233:2006 specifies methods to be used as substitutes for measurement methods specified in standards covering classical methods, such as ISO 140 (all parts), ISO 3382 (all parts) and ISO 17497-1.
ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection of the excitation signal, signal processing and environmental control are given, together with requirements for linearity and time-invariance for the systems to be tested.
ISO 18233:2006 is applicable to such measurements as airborne sound insulation between rooms and of façades, measurement of reverberation time and other acoustic parameters of rooms, measurement of sound absorption in a reverberation room, and measurement of vibration level differences and loss factor.
ISO 18233:2006 specifies methods to be used as substitutes for measurement methods specified in standards covering classical methods, such as ISO 140 (all parts), ISO 3382 (all parts) and ISO 17497-1.
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes, définitions et termes abrégés1
-
3.1 Termes et définitions1
-
3.2 Termes abrégés2
-
4 Désignations2
-
4.1 Méthode de la séquence de longueur maximale (MLS)2
-
4.2 Méthode du balayage sinusoïdal (SS)2
-
5 Principe théorique3
-
5.1 Généralités3
-
5.2 Mesurage acoustique dans une salle3
-
5.3 Transmission du son entre deux salles6
-
5.4 Utilisation de la fonction de réponse en fréquence6
-
6 Mesurage de la réponse impulsionnelle7
-
6.1 Généralités7
-
6.2 Signal d'excitation8
-
6.3 Mesurage de la réponse9
-
7 Mesurage de la fonction de réponse en fréquence15
-
8 Fidélité15
-
9 Rapport d'essai16
- Annexe A (normative) Méthode de la séquence de longueur maximale17
- Annexe B (normative) Méthode du balayage sinusoïdal21
- Bibliographie27
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ