NF EN ISO 18593

NF EN ISO 18593

July 2018
Standard Current

Microbiology of the food chain - Horizontal methods for sampling techniques from surfaces using contact plates and swabs

This document specifies horizontal methods for sampling techniques using contact plates, stick swabs, sponges and cloths on surfaces in the food chain environment in order to detect and enumerate culturable microorganisms such as pathogenic or non-pathogenic bacteria or yeasts and moulds. NOTE The term "environment" means any item in contact with the food product or likely to represent a contamination or recontamination source; for example, material, premises or operators. This document does not apply to the validation of cleaning and disinfection procedures. This document does not apply to sampling techniques for primary production samples, which are covered by ISO 13307. Sampling techniques for carcasses are covered by ISO 17604. Sampling techniques for analysis of noroviruses and hepatitis A viruses are covered by ISO 15216-1. This document does not give advice on sampling frequency, the number of sampling points, or the need to rotate sampling points, as these are chosen on a case-by-case basis.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2018

Number of pages

21 p.

Reference

NF EN ISO 18593

ICS Codes

07.100.30   Food microbiology

Classification index

V08-035

Print number

1

International kinship

European kinship

EN ISO 18593:2018
Sumary
Microbiology of the food chain - Horizontal methods for sampling techniques from surfaces using contact plates and swabs

This document specifies horizontal methods for sampling techniques using contact plates, stick swabs, sponges and cloths on surfaces in the food chain environment in order to detect and enumerate culturable microorganisms such as pathogenic or non-pathogenic bacteria or yeasts and moulds.

NOTE The term "environment" means any item in contact with the food product or likely to represent a contamination or recontamination source; for example, material, premises or operators.

This document does not apply to the validation of cleaning and disinfection procedures.

This document does not apply to sampling techniques for primary production samples, which are covered by ISO 13307. Sampling techniques for carcasses are covered by ISO 17604. Sampling techniques for analysis of noroviruses and hepatitis A viruses are covered by ISO 15216-1.

This document does not give advice on sampling frequency, the number of sampling points, or the need to rotate sampling points, as these are chosen on a case-by-case basis.

Replaced standards (1)
NF ISO 18593
December 2004
Standard Cancelled
Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs

<p>ISO 18593:2004 specifies horizontal methods for sampling techniques using contact plates or swabs on surfaces in the food industry environment (and food processing plants), with a view of detecting or enumerating viable microorganisms.</p>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Milieux de culture et réactifs
  • 6 Matériel et consommables
  • 7 Mode opératoire de prélèvement
  • 8 Conservation et transport
  • 9 Analyse microbiologique des échantillons
  • 10 Expression des résultats et calcul
  • 11 Rapport d'essai
  • Annexe A (informative) Neutralisants
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ