NF EN ISO 19980
Ophthalmic instruments - Corneal topographers
This International Standard specifies minimum requirements for instruments and systems that fall into the class of corneal topographers (CTs). It also specifies tests and procedures to verify that a system or instrument complies with this International Standard and thus qualifies as a CT according to this International Standard. It also specifies tests and procedures that allow the verification of capabilities of systems that are beyond the minimum requirements for CTs. This International Standard defines terms that are specific to the characterization of the corneal shape so that they may be standardized throughout the field of vision care. This International Standard is applicable to instruments, systems and methods that are intended to measure the surface shape of the cornea of the human eye. NOTE The measurements can be of the curvature of the surface in local areas, three-dimensional topographical measurements of the surface or other more global parameters used to characterize the surface. It is not applicable to ophthalmic instruments classified as ophthalmometers.
This International Standard specifies minimum requirements for instruments and systems that fall into the class of corneal topographers (CTs). It also specifies tests and procedures to verify that a system or instrument complies with this International Standard and thus qualifies as a CT according to this International Standard. It also specifies tests and procedures that allow the verification of capabilities of systems that are beyond the minimum requirements for CTs.
This International Standard defines terms that are specific to the characterization of the corneal shape so that they may be standardized throughout the field of vision care.
This International Standard is applicable to instruments, systems and methods that are intended to measure the surface shape of the cornea of the human eye.
NOTE The measurements can be of the curvature of the surface in local areas, three-dimensional topographical measurements of the surface or other more global parameters used to characterize the surface.
It is not applicable to ophthalmic instruments classified as ophthalmometers.
Le présent document s'applique aux instruments, systèmes et méthodes visant à mesurer la forme de surface de la cornée de l'oeil humain. Il spécifie les exigences minimales applicables aux instruments et aux systèmes appartenant à la classe des topographes cornéens.
<p>This document specifies minimum requirements for instruments and systems that fall into the class of corneal topographers (CTs). It also specifies tests and procedures to verify that a system or instrument complies with this document and thus qualifies as a CT according to this document. It also specifies tests and procedures that allow the verification of capabilities of systems that are beyond the minimum requirements for CTs.</p> <p>This document defines terms that are specific to the characterization of the corneal shape so that they may be standardized throughout the field of vision care.</p> <p>This document is applicable to instruments, systems and methods that are intended to measure the surface shape of the cornea of the human eye.</p> <p>NOTE The measurements can be of the curvature of the surface in local areas, three-dimensional topographical measurements of the surface or other more global parameters used to characterize the surface.</p> <p>This document is not applicable to ophthalmic instruments classified as ophthalmometers.</p>
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Exigences9
-
4.1 Zone mesurée9
-
4.2 Densité d'échantillonnage du mesurage9
-
4.3 Mesurage et rapport de performances9
-
4.4 Présentation colorée des résultats9
-
5 Méthodes d'essai et dispositifs d'essai9
-
5.1 Essais9
-
5.2 Surfaces d'essai10
-
5.3 Collecte de données, surfaces d'essai12
-
5.4 Analyse des données12
-
6 Documents d'accompagnement13
-
7 Marquage13
- Annexe A (informative) Surfaces d'essai des topographes cornéens (TC)14
- Annexe B (normative) Affichages normalisés des topographes cornéens (TC)16
- Annexe C (normative) Calcul des valeurs de pondération de zone20
- Annexe D (normative) Méthodes d'essai de mesure des cornées humaines22
- Bibliographie23
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ