NF EN ISO 21068-2
Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2 : determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
ISO 21068-2:2008 specifies analytical techniques for the determination of change in mass by thermal treatment at specified temperatures, and methods for the determination of the total carbon content, free carbon, silicon carbide, silicon, total silica and free silica content of silicon-carbide-containing raw materials and refractory products.
ISO 21068-2:2008 specifies analytical techniques for the determination of change in mass by thermal treatment at specified temperatures, and methods for the determination of the total carbon content, free carbon, silicon carbide, silicon, total silica and free silica content of silicon-carbide-containing raw materials and refractory products.
- Avant-proposv
- IntroductionVI
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Détermination du changement de masse1
-
4.1 Généralités1
-
4.2 Détermination de la perte au séchage à 250 °C (LOD250), méthode gravimétrique2
-
4.3 Détermination de la perte au feu sous argon (LOIAr)3
-
4.4 Détermination de la variation de masse par un traitement thermique préparatoire dans l'air5
-
4.5 Détermination de la perte au feu à 750 °C (LOl750)6
-
4.6 Détermination de la perte au feu à 850 °C (LOI850)7
-
4.7 Détermination de la perte au feu à 1 050 °C (LOI1 050)7
-
5 Détermination de la teneur en carbone total8
-
5.1 Généralités8
-
5.2 Techniques de combustion9
-
5.3 Techniques de détection13
-
5.4 Méthodes de détection18
-
6 Détermination de la teneur en carbone libre25
-
6.1 Généralités25
-
6.2 Décomposition de l'échantillon par combustion25
-
6.3 Techniques de détection25
-
6.4 Méthodes de détection directe25
-
6.5 Méthodes de détection indirecte30
-
6.6 Dosage direct du carbone libre par oxydation humide35
-
7 Détermination de la teneur en carbure de silicium, SIC35
-
7.1 Généralités35
-
7.2 Dosage du carbure de silicium, SiC, par la méthode quantitative indirecte35
-
7.3 Dosage du carbure de silicium, SiC, par la méthode quantitative directe36
-
7.4 Dosage du carbure de silicium, SiC, au moyen de la méthode de calcination à 750 OC37
-
7.5 Dosage du carbure de silicium, SiC, au moyen d'une méthode chimique38
-
8 Détermination de la teneur en silicium total au moyen de la silice39
-
8.1 Principe39
-
8.2 Réactifs40
-
8.3 Matériel40
-
8.4 Mode opératoire40
-
8.5 Essai à blanc41
-
8.6 Calcul41
-
9 Détermination de la teneur en silicium libre42
-
9.1 Principe42
-
9.2 Traitement préparatoire à l'acide chlorhydrique42
-
9.3 Dosage du silicium par dégagement d'hydrogène42
-
9.4 Dosage du silicium par mutation de l'argent45
-
10 Détermination de la teneur en silice, Si0247
-
10.1 Généralités47
-
10.2 Détermination de la teneur en silice combinée et/ou libre, Si0247
-
10.3 Détermination de la silice libre, Si0247
-
10.4 Détermination du dioxyde de silicium à la surface, Si02surf47
-
11 Expression des résultats48
-
12 Rapport d'essai48
- Annexe A (informative) Exemples de CRM pour la calibration de l'analyseur de carbone49
- Bibliographie50
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ