NF EN ISO 22155

NF EN ISO 22155

May 2016
Standard Current

Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method

ISO 22155:2016 specifies a static headspace method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil. ISO 22155:2016 is applicable to all types of soil. The limit of quantification is dependent on the detection system used and the quality of the methanol grade used for the extraction of the soil sample. Under the conditions specified in this International Standard, the following limits of quantifications apply (expressed on basis of dry matter). Typical limit of quantification when using GC-FID: - volatile aromatic hydrocarbons: 0,2 mg/kg; - aliphatic ethers as methyl tert.-butyl ether(MTBE) and tert.-amyl methyl ether (TAME): 0,5 mg/kg. Typical limit of quantification when using GC-ECD: - volatile halogenated hydrocarbons: 0,01 mg/kg to 0,2 mg/kg. Lower limits of quantification for some compounds can be achieved by using mass spectrometry (MS) with selected ion detection (see Annex D).

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2016

Number of pages

29 p.

Reference

NF EN ISO 22155

ICS Codes

13.080.10   Chemical characteristics of soils

Classification index

X31-438

Print number

1

International kinship

European kinship

EN ISO 22155:2016
Sumary
Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method

ISO 22155:2016 specifies a static headspace method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil.

ISO 22155:2016 is applicable to all types of soil.

The limit of quantification is dependent on the detection system used and the quality of the methanol grade used for the extraction of the soil sample.

Under the conditions specified in this International Standard, the following limits of quantifications apply (expressed on basis of dry matter).

Typical limit of quantification when using GC-FID:

- volatile aromatic hydrocarbons: 0,2 mg/kg;

- aliphatic ethers as methyl tert.-butyl ether(MTBE) and tert.-amyl methyl ether (TAME): 0,5 mg/kg.

Typical limit of quantification when using GC-ECD:

- volatile halogenated hydrocarbons: 0,01 mg/kg to 0,2 mg/kg.

Lower limits of quantification for some compounds can be achieved by using mass spectrometry (MS) with selected ion detection (see Annex D).

Replaced standards (1)
NF EN ISO 22155
May 2013
Standard Cancelled
Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method

<p>ISO 22155:2011 specifies a static headspace method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil.</p> <p>ISO 22155:2011 is applicable to all types of soil.</p> <p>The limit of determination is dependent on the detection system used and the quality of the methanol grade used for the extraction of the soil sample.</p> <p>Under the conditions specified in ISO 22155:2011, the following limits of determination apply (expressed on the basis of dry matter):</p> <p>Typical limit of determination when using gas chromatography/flame ionization detection (GC/FID):</p> <ul> <li>volatile aromatic hydrocarbons: 0,2 mg/kg;</li> <li>aliphatic ethers as methyl <i>tert</i>-butyl ether (MTBE) and <i>tert</i>-amyl methyl ether (TAME): 0,5 mg/kg.</li> </ul> <p>Typical limit of determination when using gas chromatography/electron capture detection (GC/ECD):</p> <ul> <li>volatile halogenated hydrocarbons: 0,01 mg/kg to 0,2 mg/kg.</li> </ul> <p>Lower limits of determination can be achieved for some compounds by using mass spectrometry (MS) with selected ion detection.</p>

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Principe
  • 4 Réactifs
  • 5 Appareillage
  • 6 Échantillonnage, conservation et traitement préliminaire des échantillons
  • 7 Mode opératoire
  • 8 Calculs
  • 9 Expression des résultats
  • 10 Fidélité
  • 11 Rapport d'essai
  • Annexe A Temps de rétention relatifs par rapport à l'éthylbenzène-D10 des hydrocarbures aromatiques volatils et des hydrocarbures halogénés volatils - Exemples d'ions cibles et qualifiants adaptés
  • Annexe B Vérification sur des étalons internes
  • Annexe C Validation (généralités)
  • Annexe D Caractéristiques de performance
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ