ISO 2320:2008 specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque/clamp force properties. ISO 2320:2008 applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts: a) with triangular ISO thread according to ISO 68-1; b) with diameter/pitch combination according to ISO 261 and ISO 262; c) with coarse pitch thread M3 to M39 and mechanical properties according to ISO 898-2; d) with fine pitch thread M8×1 to M39×3 and mechanical properties according to ISO 898-6; e) within the temperature range of -50 °C to +150 °C for prevailing torque all metal type nuts; f) within the temperature range of -50 °C to +120 °C for prevailing torque non-metallic insert type nuts. ISO 2320:2008 does not apply: 1) to nuts of type e), outside the range -50 °C to +150 °C for prevailing torque all metal type nuts, when it is necessary to consult an experienced fastener materials expert to determine appropriate choices for a given application; 2) to nuts of type f), when use at or near the temperature limits can reduce the prevailing torque capability of prevailing torque non-metallic insert type nuts and can require the use of an adequate non-metallic material — it is necessary to consult an experienced fastener materials expert for temperatures outside the range -50 °C to +120 °C for prevailing torque non-metallic insert type nuts to determine appropriate choices for a given application.
ISO 2320:2008 specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque/clamp force properties.
ISO 2320:2008 applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts: a) with triangular ISO thread according to ISO 68-1; b) with diameter/pitch combination according to ISO 261 and ISO 262; c) with coarse pitch thread M3 to M39 and mechanical properties according to ISO 898-2; d) with fine pitch thread M8×1 to M39×3 and mechanical properties according to ISO 898-6; e) within the temperature range of -50 °C to +150 °C for prevailing torque all metal type nuts; f) within the temperature range of -50 °C to +120 °C for prevailing torque non-metallic insert type nuts.
ISO 2320:2008 does not apply: 1) to nuts of type e), outside the range -50 °C to +150 °C for prevailing torque all metal type nuts, when it is necessary to consult an experienced fastener materials expert to determine appropriate choices for a given application; 2) to nuts of type f), when use at or near the temperature limits can reduce the prevailing torque capability of prevailing torque non-metallic insert type nuts and can require the use of an adequate non-metallic material — it is necessary to consult an experienced fastener materials expert for temperatures outside the range -50 °C to +120 °C for prevailing torque non-metallic insert type nuts to determine appropriate choices for a given application.
<p>ISO 2320:2015 specifies the functional properties for prevailing torque steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a combined test method to determine the prevailing torque properties and the torque/clamp force properties at the same time.</p> <p>It applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts:</p> <p>- with triangular ISO thread in accordance with ISO 68‑1;</p> <p>- with diameter/pitch combination in accordance with ISO 261 and ISO 262;</p> <p>- with coarse pitch thread M5 to M39 or with fine pitch thread M8 × 1 to M39 × 3;</p> <p>- with thread tolerances in accordance with ISO 965-2;</p> <p>- with mechanical properties in accordance with ISO 898‑2;</p> <p>Prevailing torque values specified in this standard are based on laboratory test conditions.</p> <p>NOTE 1 Actual prevailing torques in practical application can vary.</p> <p>NOTE 2 All metal type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +150 °C.</p> <p>NOTE 3 Non-metallic insert type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +120 °C.</p> <p>WARNING ? Temperatures outside the ambient temperature range can influence the functional properties (torque/clamp force and prevailing torque properties), see Annex A.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ