NF EN ISO 28927-1
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1 : angle and vertical grinders
This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine. This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders. NOTE To avoid confusion with the terms "power tool" and "inserted tool", machine is used for the former throughout this document.
This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine.
This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders.
NOTE To avoid confusion with the terms "power tool" and "inserted tool", machine is used for the former throughout this document.
Le présent document s'inscrit dans une série de documents sur le mesurage des vibrations au niveau des poignées des machines à moteur portatives. La présente partie traite des meuleuses verticales et angulaires et vient en appui des Directives "Machines" 98/37/CE et 2006/42/CE.
Le présent amendement est destiné à élargir le domaine d'application de la norme pour ajouter les brosses métalliques creuses. Il propose également d'ajouter à l'Annexe C une alternative pour les trous des balourds des meules artificielles à moyeu déporté de type 27, comme cela existe dans la NF EN ISO 28927-4 "Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 4 : Meuleuses droites".
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Normes de référence et codes d'essai de vibration
-
5 Description de la famille de machines
-
6 Caractérisation des vibrations
-
7 Spécifications pour l'appareillage
-
8 Conditions d'essai et de fonctionnement de la machine
-
9 Modes opératoires de mesurage et validation
-
10 Rapport de mesurage
- Annexe A Modèle de rapport d'essai pour les émissions vibratoires des meuleuses ¿verticales et les meuleuses d'angles
- Annexe B Détermination de l'incertitude
- Annexe C Conception des meules artificielles
- Bibliographie
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ