NF EN ISO 306

NF EN ISO 306

January 2014
Standard Cancelled

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

ISO 306:2013 specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials: method A50 using a force of 10 N and a heating rate of 50 K/h; method B50 using a force of 50 N and a heating rate of 50 K/h; method A120 using a force of 10 N and a heating rate of 120 K/h; method B120 using a force of 50 N and a heating rate of 120 K/h. The methods specified are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2014

Number of pages

26 p.

Reference

NF EN ISO 306

ICS Codes

83.080.20   Thermoplastic materials

Classification index

T51-021

Print number

1 - 19/12/2013

International kinship

ISO 306:2013

European kinship

EN ISO 306:2013
Sumary
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

ISO 306:2013 specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials:

  • method A50 using a force of 10 N and a heating rate of 50 K/h;
  • method B50 using a force of 50 N and a heating rate of 50 K/h;
  • method A120 using a force of 10 N and a heating rate of 120 K/h;
  • method B120 using a force of 50 N and a heating rate of 120 K/h.

The methods specified are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly.

Replaced standards (1)
NF EN ISO 306
December 2004
Standard Cancelled
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

<p>ISO 306:2004 specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials: </p> <ol><li>Method A50 using a force of 10 N and a heating rate of 50 °C/h</li><li>Method B50 using a force of 50 N and a heating rate of 50 °C/h</li><li>Method A120 using a force of 10 N and a heating rate of 120 °C/h</li><li>Method B120 using a force of 50 N and a heating rate of 120 °C/h.</li></ol> <p>The methods specified are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly.</p>

Standard replaced by (1)
NF EN ISO 306
November 2022
Standard Current
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

<p>This document specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials:</p> <p>—    Method A50 using a force of 10 N and a heating rate of 50 °C/h;</p> <p>—    Method B50 using a force of 50 N and a heating rate of 50 °C/h;</p> <p>—    Method A120 using a force of 10 N and a heating rate of 120 °C/h;</p> <p>—    Method B120 using a force of 50 N and a heating rate of 120 °C/h.</p> <p>The methods specified are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine dapplication
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    2
  • 5 Appareillage
    2
  • 6 Étalonnage du cadre d'essai
    5
  • 7 Éprouvettes
    6
  • 8 Conditionnement
    6
  • 9 Mode opératoire
    6
  • 10 Fidélité
    7
  • 11 Rapport d'essai
    7
  • Annexe A (informative) Comparaison des résultats de VST obtenus avec un bain liquide caloporteur et une unité de chauffage par contact direct
    9
  • Annexe B (informative) Comparaison des résultats de VST obtenus avec un bain liquide caloporteur et un lit fluidisé
    11
  • Annexe C (informative) Répétabilité et fidélité
    13
  • Bibliographie
    16
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ