NF EN ISO 3095

NF EN ISO 3095

October 2013
Standard Current

Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles

ISO 3095:2013 specifies measurement methods and conditions to obtain reproducible and comparable exterior noise emission levels and spectra for all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called "unit". ISO 3095:2013 is applicable to type testing of units. It does not include all the instructions to characterize the noise emission of the other infrastructure related sources (bridges, crossings, switching, impact noise, curving noise, etc.). ISO 3095:2013 is not applicable to: - the noise emission of track maintenance units while working; - environmental impact assessment; - noise emmission assessment; - guided buses; - warning signal noise. The results may be used, for example: - to characterize the exterior noise emitted by units; - to compare the noise emission of various units on a particular track section; - to collect basic source data for units.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2013

Number of pages

61 p.

Reference

NF EN ISO 3095

ICS Codes

17.140.30   Noise emitted by means of transport
45.060.01   Railway rolling stock in general

Classification index

F01-520

Print number

1

International kinship

ISO 3095:2013

European kinship

EN ISO 3095:2013
Sumary
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles

ISO 3095:2013 specifies measurement methods and conditions to obtain reproducible and comparable exterior noise emission levels and spectra for all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called "unit".

ISO 3095:2013 is applicable to type testing of units. It does not include all the instructions to characterize the noise emission of the other infrastructure related sources (bridges, crossings, switching, impact noise, curving noise, etc.).

ISO 3095:2013 is not applicable to:

- the noise emission of track maintenance units while working;

- environmental impact assessment;

- noise emmission assessment;

- guided buses;

- warning signal noise.

The results may be used, for example:

- to characterize the exterior noise emitted by units;

- to compare the noise emission of various units on a particular track section;

- to collect basic source data for units.

Replaced standards (1)
NF EN ISO 3095
November 2005
Standard Cancelled
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles

Le présent document spécifie les conditions requises pour obtenir des résultats de mesure reproductibles et comparables des niveaux et des spectres du bruit émis par tous les types de véhicules circulant sur rails ou tous autres véhicules à déplacement guidé, ci-après désignés conventionnellement "train", excepté les véhicules de maintenance de la voie en fonctionnement. Le présent document est applicable pour les essais de type et les essais de contrôle périodique ("monitoring").

Table of contents
View the extract
  • Avant-propos
    v
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Instrumentation et étalonnage
    5
  • 5 Essai à l'arrêt
    6
  • 6 Essai à vitesse constante
    11
  • 7 Essai d'accélération à partir de l'arrêt
    24
  • 8 Essai de freinage
    29
  • 9 Qualité des mesurages
    32
  • 10 Rapport d'essai
    33
  • Annexe A (normative) Méthode pour caractériser le caractère impulsionnel du bruit
    34
  • Annexe B (normative) Essais à vitesse constante - Cas particuliers
    35
  • Annexe C (normative) Méthode pour évaluer de petits écarts acceptables par rapport aux exigences de rugosité des rails
    40
  • Annexe D (informative) Orientations pour la mesure des véhicules ferroviaires légers
    42
  • Annexe E (informative) Comparabilité des situations d'essais en termes de rugosité acoustique des rails
    46
  • Annexe F (informative) Mesurages supplémentaires
    50
  • Annexe G (informative) Quantification des incertitudes de mesure conformément au Guide ISO/IEC 98-3:2008
    51
  • Bibliographie
    57
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ