NF EN ISO 5356-1

NF EN ISO 5356-1

March 2005
Standard Cancelled

Anaesthetic and respiratory equipment - Conical connectors - Part 1 : cones and sockets

ISO 5356-1:2004 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers. ISO 5356-1:2004 gives requirements for the following conical connectors: 8,5 mm sizes intended for use in paediatric breathing systems;15 mm and 22 mm sizes intended for general use in breathing systems;22 mm latching connectors (including performance requirements);23 mm size intended for use with vaporizers, but not for use in breathing systems;30 mm size intended for the connection of a breathing system to an anaesthetic gas scavenging system. ISO 5356-1:2004 does not specify the medical devices and accessories on which these connections are to be provided. Requirements for the application of conical connectors are not included in ISO 5356-1:2004, but are or will be given in the relevant International Standards for specific medical devices and accessories. NOTE Requirements for screw-threaded weight-bearing conical connectors are specified in ISO 5356-2.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2005

Number of pages

25 p.

Reference

NF EN ISO 5356-1

ICS Codes

11.040.10   Anaesthetic, respiratory and reanimation equipment

Classification index

S95-111-1

Print number

1 - 15/03/2005

International kinship

ISO 5356-1:2004

European kinship

EN ISO 5356-1:2004
Sumary
Anaesthetic and respiratory equipment - Conical connectors - Part 1 : cones and sockets

ISO 5356-1:2004 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers.

ISO 5356-1:2004 gives requirements for the following conical connectors:

  • 8,5 mm sizes intended for use in paediatric breathing systems;
  • 15 mm and 22 mm sizes intended for general use in breathing systems;
  • 22 mm latching connectors (including performance requirements);
  • 23 mm size intended for use with vaporizers, but not for use in breathing systems;
  • 30 mm size intended for the connection of a breathing system to an anaesthetic gas scavenging system.

ISO 5356-1:2004 does not specify the medical devices and accessories on which these connections are to be provided.

Requirements for the application of conical connectors are not included in ISO 5356-1:2004, but are or will be given in the relevant International Standards for specific medical devices and accessories.

NOTE Requirements for screw-threaded weight-bearing conical connectors are specified in ISO 5356-2.

Replaced standards (2)
NF EN 1281-1
March 1997
Standard Cancelled
Anaesthetic and respiratory equipment. Conical connectors. Part 1 : cones and sockets.

Le présent document fixe les spécifications des raccords coniques des pièces intermédiaires des systèmes respiratoires pour le matériel respiratoire et d'anesthésie, la partie 2 fixant les spécifications des raccords à vis pouvant supporter un certain poids.

NF EN 1281-1/A1
September 1998
Standard Cancelled
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets

Le présent document amende la norme NF EN 1281-1 concernant les spécifications des raccords coniques des pièces intermédiaires des systèmes respiratoires. Cet amendement supprime toute information générale à fournir et renvoie, pour ce point, aux normes particulières des dispositifs médicaux.

Standard replaced by (1)
NF EN ISO 5356-1
May 2015
Standard Current
Anaesthetic and respiratory equipment - Conical connectors - Part 1 : cones and sockets

<p>ISO 5356-1:2015 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic gas scavenging systems, and vaporizers. The cones and sockets are therefore not regarded as devices in their own right. </p> <p>It gives requirements for the following cones and sockets: 8,5 mm and 11,5 mm sizes intended for use in neonatal and paediatric breathing systems; 15 mm and 22 mm sizes intended for general use in breathing systems; 22 mm latching sockets (including performance requirements); 23 mm size intended for use with vaporizers, but not for use in breathing systems; 30 mm size intended for the connection of a breathing system to an anaesthetic gas scavenging system.</p> <p>It does not specify the medical devices and accessories on which these cones and sockets are to be provided.</p> <p>Requirements for the application of cones and sockets are not included, but are or will be given in the relevant International Standards for specific medical devices and accessories. Requirements for screw-threaded weight-bearing connectors are specified in ISO 5356 2.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Raccords coniques en métal
    2
  • 4.1 Exigences générales
    2
  • 4.2 Exigences supplémentaires pour raccords coniques mâles de diamètre 22 mm
    2
  • 4.3 Exigences additionnelles pour raccords coniques de diamètre 8,5 mm
    4
  • 5 Raccords coniques en matériaux non métalliques
    4
  • 5.1 Exigences générales
    4
  • 5.2 Exigences additionnelles pour raccords coniques de diamètre 22 mm
    4
  • 5.3 Exigences supplémentaires pour raccords coniques de diamètre 8,5 mm
    4
  • 6 Raccords avec système de blocage, de diamètre 22 mm
    4
  • Annexe A (normative) Calibres mâle et femelle pour la vérification des raccords coniques en matériaux non métalliques
    5
  • Annexe B (normative) Méthode d'essai de sécurité de branchement du raccord avec système de blocage de diamètre 22 mm au raccord conique mâle
    7
  • Annexe C (normative) Méthode d'essai de fuites pour raccords avec système de blocage de diamètre 22 mm
    8
  • Annexe D (normative) Essai de chute pour raccords avec système de blocage de diamètre 22 mm
    9
  • Annexe E (informative) Calibres mâle et femelle pour la vérification des raccords coniques en métal
    10
  • Annexe F (informative) Appareillage et méthodes proposés pour les essais de sécurité de branchement des raccords avec système de blocage de diamètre 22 mm
    12
  • Bibliographie
    16
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ