NF EN ISO 5815-1

NF EN ISO 5815-1

September 2019
Standard Current

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1 : dilution and seeding method with allylthiourea addition

This document specifies the determination of the biochemical oxygen demand of waters by dilution and seeding with suppression of nitrification after 5 d or 7 d incubation time. It is applicable to all waters having biochemical oxygen demands usually between 1 mg/l and 6 000 mg/l. It applies particularly to waste waters but also suits for the analysis of natural waters. For biochemical oxygen demands greater than 6 000 mg/l of oxygen, the method is still applicable, but special care is needed taking into consideration the representativeness of subsampling for preparation of the dilution steps. The results obtained are the product of a combination of biochemical and chemical reactions in presence of living matter which behaves only with occasional reproducibility. The results do not have the rigorous and unambiguous character of those resulting from, for example, a single, well‑defined, chemical process. Nevertheless, the results provide an indication from which the quality of waters can be estimated.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2019

Number of pages

34 p.

Reference

NF EN ISO 5815-1

ICS Codes

13.060.50   Examination of water for chemical substances

Classification index

T90-103-1

Print number

1

International kinship

European kinship

EN ISO 5815-1:2019
Sumary
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1 : dilution and seeding method with allylthiourea addition

This document specifies the determination of the biochemical oxygen demand of waters by dilution and seeding with suppression of nitrification after 5 d or 7 d incubation time.

It is applicable to all waters having biochemical oxygen demands usually between 1 mg/l and 6 000 mg/l. It applies particularly to waste waters but also suits for the analysis of natural waters. For biochemical oxygen demands greater than 6 000 mg/l of oxygen, the method is still applicable, but special care is needed taking into consideration the representativeness of subsampling for preparation of the dilution steps. The results obtained are the product of a combination of biochemical and chemical reactions in presence of living matter which behaves only with occasional reproducibility. The results do not have the rigorous and unambiguous character of those resulting from, for example, a single, well‑defined, chemical process. Nevertheless, the results provide an indication from which the quality of waters can be estimated.

Replaced standards (1)
NF EN 1899-1
May 1998
Standard Cancelled
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1 : dilution and seeding method with allylthiourea addition

Le présent document s'adresse aux laboratoires ayant à déterminer la demande biochimique en oxygène après n jours (DBOn), par dilution et ensemencement. Il est susceptible de servir de base de référence, dans la réglementation française relative à la qualité des eaux.

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Réactifs
  • 6 Appareillage
  • 7 Échantillonnage et conservation
  • 8 Interférences
  • 9 Mode opératoire
  • 10 Calcul et critères de validation des résultats
  • 11 Rapport d'essai
  • Annexe A Influence des périodes d'incubation et des températures
  • Annexe B Déterminations multiples
  • Annexe C Ensemencement direct des solutions d'essai
  • Annexe D Données de performance
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ