NF EN ISO 5981
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing
ISO 5981:2007 specifies two methods of evaluating the resistance to combined shear flexing and rubbing of rubber- or plastics-coated fabrics. Rubbing is either forced by application of a pressure foot (method A), or is caused by simple contact between the faces of the test pieces (method B). Method B (without application of the pressure foot) is preferred in all cases where the foot would damage the test piece through an abrasive effect where this is not required, e.g. materials with sticky surfaces, light coatings such as polyurethanes on rough surfaces. The test may be carried out on products as delivered or after pre-treatments such as wetting or accelerated ageing. NOTE The results obtained using method A and method B cannot be compared as there is no correlation between the two methods.
ISO 5981:2007 specifies two methods of evaluating the resistance to combined shear flexing and rubbing of rubber- or plastics-coated fabrics. Rubbing is either forced by application of a pressure foot (method A), or is caused by simple contact between the faces of the test pieces (method B).
Method B (without application of the pressure foot) is preferred in all cases where the foot would damage the test piece through an abrasive effect where this is not required, e.g. materials with sticky surfaces, light coatings such as polyurethanes on rough surfaces.
The test may be carried out on products as delivered or after pre-treatments such as wetting or accelerated ageing.
NOTE The results obtained using method A and method B cannot be compared as there is no correlation between the two methods.
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Principe1
-
4 Appareillage2
-
4.1 Généralités2
-
4.2 Dimensions et caractéristiques2
-
4.3 Mâchoires2
-
4.4 Patin (facultatif)4
-
5 Éprouvettes5
-
5.1 Nombre5
-
5.2 Forme et dimensions5
-
5.3 Échantillonnage6
-
6 Intervalle de temps entre fabrication et mise à l'essai6
-
7 Atmosphère de conditionnement et d'essai6
-
8 Mode opératoire7
-
8.1 Méthode A (avec application du patin presseur)7
-
8.2 Méthode B (sans application du patin presseur)7
-
9 Examen des éprouvettes et expression des résultats7
-
10 Rapport d'essai8
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ