NF EN ISO 6508-1

NF EN ISO 6508-1

April 2015
Standard Cancelled

Metallic materials - Rockwell hardness test - Part 1 : test method

ISO 6508-1:2015 specifies the method for Rockwell regular and Rockwell superficial hardness tests (scales and applicable range of application according to Table 1) for metallic materials and is applicable to stationary and portable hardness testing machines. For specific materials and/or products, other specific International Standards apply (for instance, ISO 3738‑1 and ISO 4498). NOTE Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered to be the standard type of Rockwell indenter ball. Steel indenter balls are allowed to continue to be used only when complying with Annex A.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2015

Number of pages

41 p.

Reference

NF EN ISO 6508-1

ICS Codes

77.040.10   Mechanical testing of metals

Classification index

A03-153-1

Print number

1

International kinship

ISO 6508-1:2015

European kinship

EN ISO 6508-1:2015
Sumary
Metallic materials - Rockwell hardness test - Part 1 : test method

ISO 6508-1:2015 specifies the method for Rockwell regular and Rockwell superficial hardness tests (scales and applicable range of application according to Table 1) for metallic materials and is applicable to stationary and portable hardness testing machines.

For specific materials and/or products, other specific International Standards apply (for instance, ISO 3738‑1 and ISO 4498).

NOTE Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered to be the standard type of Rockwell indenter ball. Steel indenter balls are allowed to continue to be used only when complying with Annex A.

Replaced standards (1)
NF EN ISO 6508-1
March 2006
Standard Cancelled
Metallic materials - Rockwell hardness test - Part 1 : test method (scales A, B, C, D, E, F, G, H, K, N, T)

Le présent document spécifie la méthode d'essai de dureté Rockwell et de dureté superficielle Rockwell (échelles A, B, C, D, E, F, G, H, K, N, T) pour les matériaux métalliques.

Standard replaced by (1)
NF EN ISO 6508-1
November 2016
Standard Current
Metallic materials - Rockwell hardness test - Part 1 : test method

<p>ISO 6508-1:2016 specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.</p> <p>For specific materials and/or products, other specific International Standards apply (for instance, ISO 3738‑1 and ISO 4498).</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Principe
    1
  • 4 Symboles, abréviations et désignations
    1
  • 5 Machine d'essai
    4
  • 6 Éprouvette
    5
  • 7 Mode opératoire
    5
  • 8 Incertitude des résultats
    7
  • 9 Rapport d'essai
    7
  • 10 Conversions vers d'autres échelles de dureté ou en valeurs de résistance à la traction
    8
  • Annexe A (normative) Essai spécial HR30TSm et HR15TSm pour les produits minces
    9
  • Annexe B (normative) Epaisseur minimale de l'éprouvette en fonction de la dureté Rockwell
    10
  • Annexe C (normative) Corrections à ajouter aux valeurs de dureté Rockwell obtenues sur des surfaces cylindriques convexes
    13
  • Annexe D (normative) Corrections à ajouter aux valeurs de l'échelle de dureté Rockwell C obtenues sur des surfaces d'essai sphériques de divers diamètres
    16
  • Annexe E (normative) Procédure de vérification journalière
    17
  • Annexe F (normative) Contrôles des pénétrateurs en diamant
    20
  • Annexe G (normative) Incertitude des valeurs de dureté mesurées
    21
  • Annexe H (informative) Groupe de travail CCM sur la dureté
    28
  • Annexe I (informative) Traçabilité des mesurages de dureté Rockwell
    29
  • Bibliographie
    33
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ