NF ISO 10381-1

NF ISO 10381-1

May 2003
Standard Cancelled

Soil quality - Sampling - Part 1 : guidance on the design of sampling programmes

ISO 10381-1:2002 sets out the general principles to be applied in the design of sampling programmes for the purpose of characterizing and controlling soil quality and identifying sources and effects of contamination of soil and related material, with emphasis on procedures required to locate points from which samples may be taken for examination or at which instruments may be installed for in situ measurement including statistical implications,procedures for determining how much sample to collect and whether to combine samples,methods of collecting samples,methods for containing, storing and transporting samples to prevent deterioration/contamination.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2003

Number of pages

42 p.

Reference

NF ISO 10381-1

ICS Codes

13.080.05   Examination of soils in general

Classification index

X31-008-1

Print number

1 - 16/06/2003

International kinship

Sumary
Soil quality - Sampling - Part 1 : guidance on the design of sampling programmes

ISO 10381-1:2002 sets out the general principles to be applied in the design of sampling programmes for the purpose of characterizing and controlling soil quality and identifying sources and effects of contamination of soil and related material, with emphasis on

  • procedures required to locate points from which samples may be taken for examination or at which instruments may be installed for in situ measurement including statistical implications,
  • procedures for determining how much sample to collect and whether to combine samples,
  • methods of collecting samples,
  • methods for containing, storing and transporting samples to prevent deterioration/contamination.
Standard replaced by (2)
NF ISO 18400-107
December 2017
Standard Current
Soil quality - Sampling - Part 107 : recording and reporting

<p>ISO 18400-107:2017 specifies the minimum information required for a sampling report independent of the purpose of the investigation.</p> <p>The preparation of the overall investigation report is not covered by this document (see ISO/IEC 17025:2005, 5.10.3).</p>

NF ISO 18400-104
April 2019
Standard Current
Soil quality - Sampling - Part 104 : strategies

<p>This document gives general guidance on the development of site investigation strategies and detailed guidance on the development of sampling strategies, when collecting information on</p> <p>— the average properties of soil,</p> <p>— the variability of soil properties, and</p> <p>— the spatial distribution of soil properties.</p> <p>It is applicable to soil samples intended for chemical testing and determination of a variety of other properties (e.g. physical).</p> <p>Although the main focus of this document is the collection of material (field samples) for transfer to a laboratory for testing, it is also applicable when measurements are made directly in the field.</p> <p>NOTE 1 This document also provides information on the statistical principles underlying the development of appropriate sampling strategies and statistical methodologies.</p> <p>NOTE 2 Guidance on other forms of related sampling activities are given in other International Standards [for soil gas (ISO 18400-204) and for biological testing purposes (ISO 18400-206)]. Guidance on sampling groundwater is provided in ISO 5667-11 and ISO 5667-22 and on sampling methods and groundwater measurements in geotechnical investigations in ISO 22475-1.</p>

Table of contents
View the extract
  • Avant-propos
    v
  • Introduction
    vi
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
    1
  • 4 Définition des objectifs des programmes d'échantillonnage
    2
  • 4.1 Généralités 2
  • 4.2 Objectif
    2
  • 4.3 Informations préliminaires
    3
  • 4.4 Stratégie 3
  • 4.5 Échantillonnage
    3
  • 4.6 Sécurité
    4
  • 4.7 Rapport d'échantillonnage 4
  • 5 Objectifs de l'échantillonnage
    4
  • 5.1 Généralités 4
  • 5.2 Objectifs spécifiques
    6
  • 5.3 Échantillonnage d'un autre matériau en rapport avec l'étude du sol
    8
  • 6 Considérations particulières relatives à l'échantillonnage des sols
    8
  • 6.1 Généralités 8
  • 6.2 Enquête préliminaire
    8
  • 7 Exigences relatives au personnel d'échantillonnage
    10
  • 7.1 Généralités
    10
  • 7.2 Expérience
    10
  • 7.3 Coordination de l'échantillonnage et de l'analyse
    11
  • 8 Précautions de sécurité
    i l
  • 9 Échantillons et points d'échantillonnage
    1 1
  • 9.1 Généralités
    11
  • 9.2 Modèles d'échantillonnage
    11
  • 9.3 Identification des points d'échantillonnage
    1 3
  • 9.4 Préparation du site d'échantillonnage
    14
  • 9.5 Obstacles à l'échantillonnage
    14
  • 9.6 Choix du matériel adapté au prélèvement d'échantillons
    15
  • 9.7 Profondeur d'échantillonnage
    15
  • 9.8 Planification de l'étude
    1 6
  • 9.9 Quantité échantillonnée
    1 6
  • 9.10 Échantillons uniques 1 échantillons composites
    16
  • 9.11 Conservation, manipulation et conditionnement en laboratoire, étiquetage et transport des échantillons de sol 17
  • 10 Rapport d'échantillonnage
    20
  • 10.1 Généralités 20
  • 10.2 Libellé 21
  • 10.3 Données relatives au site 21
  • 10.4 Mode opératoire d'échantillonnage
    21
  • 10.5 Transport et stockage
    22
  • 10.6 Description du sol, du profil et du site
    22
  • 10.7 Description de l'échantillon et du profil
    22
  • 10.8 Description du site
    22
  • 11 Contrôle de la qualité, assurance qualité, exploitation et contrôle des laboratoires
    22
  • Annexe A (informative) Sources d'informations complémentaires 23
  • Annexe B (informative) Détermination d'un plan d'échantillonnage 25
  • Annexe C (informative) Exemples de modèles d'échantillonnage utilisés dans les programmes
  • d'échantillonnage du sol
    26
  • Bibliographie
    35
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ