NF ISO 10381-2

NF ISO 10381-2

March 2003
Standard Cancelled

Soil quality - Sampling - Part 2 : Guidance on sampling techniques

ISO 10381-2:2002 gives guidance on techniques for taking and storing soil samples so that these can subsequently be examined for the purpose of providing information on soil quality. ISO 10381-2:2002 gives information on typical equipment that is applicable in particular sampling situations to enable correct sampling procedures to be carried out and representative samples to be collected. Guidance is given on the selection of the equipment and the techniques to use to enable both disturbed and undisturbed samples to be correctly taken at different depths. The guidance provided is intended to assist in the collection of samples for soil quality for agricultural purposes and also provide guidance for the collection of samples for contamination investigations which will require different techniques and skills. ISO 10381-2:2002 makes reference to some aspects of the collection of samples of groundwater and soil gas as part of a soil sampling programme. ISO 10381-2:2002 specifically does not cover investigations for geotechnical purposes, though where redevelopment of a site is envisaged the soil quality investigation and the geotechnical investigation may be beneficially combined. ISO 10381-2:2002 is not applicable to the sampling of hard strata such as bedrock. Techniques to collect information on soil quality without taking samples, such as geophysical methods, are not covered by ISO 10381-2:2002.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2003

Number of pages

31 p.

Reference

NF ISO 10381-2

ICS Codes

13.080.05   Examination of soils in general

Classification index

X31-008-2

Print number

1 - 06/03/2003

International kinship

Sumary
Soil quality - Sampling - Part 2 : Guidance on sampling techniques

ISO 10381-2:2002 gives guidance on techniques for taking and storing soil samples so that these can subsequently be examined for the purpose of providing information on soil quality.

ISO 10381-2:2002 gives information on typical equipment that is applicable in particular sampling situations to enable correct sampling procedures to be carried out and representative samples to be collected. Guidance is given on the selection of the equipment and the techniques to use to enable both disturbed and undisturbed samples to be correctly taken at different depths.

The guidance provided is intended to assist in the collection of samples for soil quality for agricultural purposes and also provide guidance for the collection of samples for contamination investigations which will require different techniques and skills.

ISO 10381-2:2002 makes reference to some aspects of the collection of samples of groundwater and soil gas as part of a soil sampling programme.

ISO 10381-2:2002 specifically does not cover investigations for geotechnical purposes, though where redevelopment of a site is envisaged the soil quality investigation and the geotechnical investigation may be beneficially combined.

ISO 10381-2:2002 is not applicable to the sampling of hard strata such as bedrock.

Techniques to collect information on soil quality without taking samples, such as geophysical methods, are not covered by ISO 10381-2:2002.

Standard replaced by (1)
NF ISO 18400-102
December 2017
Standard Current
Soil quality - Sampling - Part 102 : selection and application of sampling techniques

<p>ISO 18400-102:2017 gives guidelines for techniques for taking samples so that these can subsequently be examined for the purpose of providing information on soil quality. It gives information on equipment that is typically applicable in particular sampling situations to enable correct sampling procedures to be carried out and representative samples to be collected. Guidance is given on the selection of the equipment and the techniques to use to enable both disturbed and undisturbed samples to be correctly taken at different depths.</p> <p>ISO 18400-102:2017 does not cover:</p> <p>- investigations for geotechnical purposes, though where redevelopment of a site is envisaged, the soil quality investigation and the geotechnical investigation may sometimes be beneficially combined;</p> <p>- sampling of hard strata such as bedrock;</p> <p>- methods for the collection of information on soil quality without taking samples such as geophysical methods;</p> <p>- collection of water samples (these are to be collected in accordance with appropriate International Standards on ground or surface water sampling; for further information, see the ISO 5667 series);</p> <p>- investigations of soil gas about which guidance is provided in ISO 18400‑204;</p> <p>- investigation of radioactively contaminated sites.</p> <p>NOTE 1 "Sampling technique" is defined in ISO 11074.</p> <p>NOTE 2 Guidance on the investigation and assessment of radioactivity in soils is provided in the ISO 18589 series.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Objectifs
    2
  • 4.1 Échantillonnage du sol
    2
  • 4.2 Échantillonnage de l'eau
    3
  • 4.3 Échantillonnage des gaz du sol
    3
  • 5 Choix des techniques d'échantillonnage
    3
  • 5.1 Informations préliminaires
    3
  • 5.2 Type d'échantillon
    5
  • 5.3 Choix de la technique d'échantillonnage
    5
  • 5.4 Contamination croisée
    6
  • 6 Sécurité et protection de l'environnement pendant l'étude
    7
  • 6.1 Protection des personnes
    7
  • 6.2 Protection des bâtiments et des installations
    8
  • 6.3 Protection de l'environnement
    8
  • 6.4 Remblayage
    8
  • 7 Techniques
    9
  • 7.1 Généralités
    9
  • 7.2 Contamination croisée
    10
  • 7.3 Échantillons non remaniés
    12
  • 8 Stockage des échantillons
    12
  • 8.1 Généralités
    12
  • 8.2 Conteneurs à échantillons
    12
  • 8.3 Étiquetage
    14
  • 8.4 Stockage des échantillons
    14
  • 9 Rapport d'échantillonnage
    15
  • Annexe A (informative) Outils d'échantillonnage manuels et mécaniques
    16
  • Bibliographie
    25
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ