NF ISO 11228-2
Ergonomics - Manual handling - Part 2 : pushing and pulling
ISO 11228-2:2007 gives the recommended limits for whole-body pushing and pulling. It provides guidance on the assessment of risk factors considered important to manual pushing and pulling, allowing the health risks for the working population to be evaluated. The recommendations apply to the healthy adult working population and provide reasonable protection to the majority of this population. These guidelines are based on experimental studies of push-pull tasks and associated levels of musculoskeletal loading, discomfort/pain, and endurance/fatigue. Pushing and pulling, as defined in ISO 11228-2:2007, is restricted to the following: whole-body force exertions (i.e. while standing/walking); actions performed by one person; forces applied by two hands; forces used to move or restrain an object; forces applied in a smooth and controlled way; forces applied without the use of external support(s); forces applied on objects located in front of the operator; forces applied in an upright position (not sitting). ISO 11228-2:2007 is intended to provide information for designers, employers, employees and others involved in the design or redesign of work, tasks, products and work organization.
ISO 11228-2:2007 gives the recommended limits for whole-body pushing and pulling. It provides guidance on the assessment of risk factors considered important to manual pushing and pulling, allowing the health risks for the working population to be evaluated. The recommendations apply to the healthy adult working population and provide reasonable protection to the majority of this population. These guidelines are based on experimental studies of push-pull tasks and associated levels of musculoskeletal loading, discomfort/pain, and endurance/fatigue.
Pushing and pulling, as defined in ISO 11228-2:2007, is restricted to the following: whole-body force exertions (i.e. while standing/walking); actions performed by one person; forces applied by two hands; forces used to move or restrain an object; forces applied in a smooth and controlled way; forces applied without the use of external support(s); forces applied on objects located in front of the operator; forces applied in an upright position (not sitting).
ISO 11228-2:2007 is intended to provide information for designers, employers, employees and others involved in the design or redesign of work, tasks, products and work organization.
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Termes et définitions1
-
3 Recommandations2
-
3.1 Tâches de manipulation manuelle dangereuses2
-
3.2 Évaluation des risques2
- Annexe A (informative) Méthode 1 - Actions de pousser et de tirer: liste de contrôle pour l'évaluation générale11
- Annexe B (informative) Méthode 2 - Estimation et évaluation spécialisées des risques20
- Annexe C (informative) Méthodes de réduction des risques40
- Annexe D (informative) Méthode proposée pour mesurer les forces de poussée/traction44
- Annexe E (informative) Exemples d'application des méthodes 1 et 246
- Annexe F (informative) Méthode permettant de déterminer la distribution combinée des résistances pour un groupe de référence particulier56
- Bibliographie65
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ