NF ISO 16001

NF ISO 16001

May 2008
Standard Cancelled

Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and tests

ISO 16001:2008 specifies general requirements and describes methods for evaluating and testing the performance of hazard detection systems (HDS) and visual aids (VA) used on earth-moving machines. It covers the following aspects: detection of people in the detection zone; visual and/or audible warning(s) to the operator and/or to the persons in the detection zone; operational reliability of the system; compatibility and environmental specifications of the system. It is applicable to machines as defined in ISO 6165. HDS and/or VA can be used to augment the operator's direct vision (see ISO 5006) or indirect vision using mirrors (see ISO 14401) or to provide additional means of hazard detection, for example, where ergonomic considerations limit the effectiveness of direct vision, e.g. to avoid repeated turning of the head and upper body.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2008

Number of pages

57 p.

Reference

NF ISO 16001

ICS Codes

53.100   Earth-moving machinery

Classification index

E58-157

Print number

1 - 22/05/2008

International kinship

ISO 16001:2008
Sumary
Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and tests

ISO 16001:2008 specifies general requirements and describes methods for evaluating and testing the performance of hazard detection systems (HDS) and visual aids (VA) used on earth-moving machines. It covers the following aspects: detection of people in the detection zone; visual and/or audible warning(s) to the operator and/or to the persons in the detection zone; operational reliability of the system; compatibility and environmental specifications of the system.

It is applicable to machines as defined in ISO 6165. HDS and/or VA can be used to augment the operator's direct vision (see ISO 5006) or indirect vision using mirrors (see ISO 14401) or to provide additional means of hazard detection, for example, where ergonomic considerations limit the effectiveness of direct vision, e.g. to avoid repeated turning of the head and upper body.

Standard replaced by (1)
NF EN ISO 16001
December 2017
Standard Current
Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests

<p>ISO 16001:2017 specifies general requirements and describes methods for evaluating and testing the performance of object detection systems (ODSs) and visibility aids (VAs) used on earth-moving machines. It covers the following aspects:</p> <p>- detection or visibility or both of objects including people in the detection zone;</p> <p>- visual, audible, or both warnings to the operator and if appropriate to the persons in the detection zone;</p> <p>- operational reliability of the system;</p> <p>- compatibility and environmental specifications of the system.</p> <p>It is applicable to machines as defined in ISO 6165. An ODS, VA or both can be used to augment the operator's direct vision (see ISO 5006) or indirect vision using mirrors (see ISO 14401). In addition, an ODS, VA or both can be used to provide additional means of object detection or view, for example, where ergonomic considerations limit the effectiveness of direct vision and to avoid repeated turning of the head and upper body.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences de performances et essais
    3
  • 4.1 Exigences générales
    3
  • 4.2 Emplacement et fixation des dispositifs HDS et VA
    4
  • 4.3 Dispositifs associés au poste de commande
    4
  • 4.4 Activation du système et contrôle initial
    5
  • 4.5 Temps de détection et de réponse du HDS
    5
  • 4.6 Intégrité opérationnelle
    5
  • 4.7 Désactivation du système
    6
  • 4.8 Environnement physique et conditions de fonctionnement
    6
  • 5 Marquage et identification
    6
  • 6 Manuel d'utilisation
    6
  • Annexe A (informative) Sélection des systèmes de détection des risques (HDS) et d'aide visuelle (VA)
    8
  • Annexe B (normative) Mode opératoire d'essai pour les caméras de télévision en circuit fermé (CCTV) - Exigences supplémentaires de performance et essais
    14
  • Annexe C (normative) Mode opératoire d'essai pour les capteurs radar
    21
  • Annexe D (normative) Mode opératoire d'essai pour les systèmes de détection à ultrasons
    26
  • Annexe E (normative) Mode opératoire d'essai pour les transpondeurs à ultrasons
    34
  • Annexe F (informative) Mode opératoire d'essai pour les émetteurs-récepteurs de signaux électromagnétiques
    44
  • Bibliographie
    51
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ